|
|
|
|
| Author |
|
|
Wer bremst verliert
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 4,767
|
Engine #6135776 lookup please
I have this engine on a stand and interested in its original donor. Could someone provide a lookup please?
It looks to be a 2.7 case with big bore intake heads, carrera tensioners and webers but there are lots of mixed bits on the car it came from. Thanks!
__________________
2007 911 Turbo - Not a toy 1985 911 Cab - Wife's toy 1982 911 3.2 Indiash Rot Track Supercharged track toy 1978 911 3.0 Lichtbau toy "Gretchen" 1971 911 Targa S backroad toy |
||
10-05-2012, 08:32 PM
|
|
|
Wer bremst verliert
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 4,767
|
Heads are 38mm intakes, listed in Bruce's book for 906 and 911R racing engines, 911/20, 911/21, 911/22 for "racing engines fuel injected" and "racing engines Weber 46IDA carbs".
__________________
2007 911 Turbo - Not a toy 1985 911 Cab - Wife's toy 1982 911 3.2 Indiash Rot Track Supercharged track toy 1978 911 3.0 Lichtbau toy "Gretchen" 1971 911 Targa S backroad toy |
||
|
10-05-2012, 09:05 PM
|
|
|
Registered
|
My 1973 2.4 cis engine number is 6135865. Yours seems to be a little earlier. What is the other number stamped by the cylinder, mine is 911/91.
__________________
Ed 1973.5 T |
||
|
10-06-2012, 03:50 AM
|
|
|
Registered
Join Date: Jan 2004
Location: CT
Posts: 11,538
|
John
That S/N corresponds to a 1973.5 911T. This would have a 7R case like the 2.7 but with smaller spigots for the 84 mm cylinders. The stock configuration would have the unique 2.4 CIS heads with an injector hole and the 30/33 mm ports
__________________
Tom Butler 1973 RSR Clone 1970 911E 914-6 GT Recreation in Process |
||
|
10-06-2012, 11:06 AM
|
|
|
Wer bremst verliert
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 4,767
|
Thanks Ed and Tom. The PO represented the motor as a "2.7 built to RS specs." Its another Pelican, but the statute of limitations is up so I wont name names unless he wants to pipe up.
I need to finish stripping the rest of the car now and get a big order into Pelican ASAP so just trying to guess what motor bits I'll need before actually tearing it down. It ran fine before but I still plan on rebuilding it over the winter. So, a 2.4 case with what is reported to be 2.7 jugs and mahle pistons and S cams....it was fun when it ran, lets see whats going on inside...
__________________
2007 911 Turbo - Not a toy 1985 911 Cab - Wife's toy 1982 911 3.2 Indiash Rot Track Supercharged track toy 1978 911 3.0 Lichtbau toy "Gretchen" 1971 911 Targa S backroad toy |
||
|
10-06-2012, 02:05 PM
|
|
|
Registered
Join Date: Jan 2004
Location: CT
Posts: 11,538
|
John
The 2.4 case can be opened up at the spigot bores to accept the 2.7 cylinders. With those big ports, the engine is obviously not stock.
__________________
Tom Butler 1973 RSR Clone 1970 911E 914-6 GT Recreation in Process |
||
|
10-06-2012, 06:12 PM
|
|
|
The Other Woman
