|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2005
Location: Cleveland, OH
Posts: 1,367
|
Case through bolts -- which ones are these?
Was digging through some boxes of parts and found a pile of case through bolts... Been a while since I did a motor so looking for some guidance of which ones these are.
top one: shaft 222mm long, m10 fine thread (I think this is 993 through bolt 959-101-173-01) next one down: shaft 233mm long, m10 course next down: 233mm, m10 very fine next: 233mm, m10 very fine  
|
||
12-31-2014, 12:37 PM
|
|
|
Registered
Join Date: Jan 2004
Location: CT
Posts: 11,538
|
The fine thread through bolts were introduced in the 3.0 Turbo engines and carried over to the 3.0 SC and 3.2 Carrera engines. The course thread bolts were used on all non-turbo 911 engines prior to 1978.
Many engine builders prefer the fine thread bolts because they provide better torque control for the through bolts during engine assembly.
__________________
Tom Butler 1973 RSR Clone 1970 911E 914-6 GT Recreation in Process |
||
|
01-01-2015, 04:43 AM
|
|
|
Registered
Join Date: Jul 2005
Location: Cleveland, OH
Posts: 1,367
|
Thanks Tom...
Could someone confirm the top bolt? |
||
|
01-01-2015, 06:27 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,490
|
Top bolt is from C-2, 964 and later
Bruce |
||
|
01-01-2015, 06:36 AM
|
|
