![]() |
|
|
|
Registered User
Join Date: Jul 2013
Posts: 3
|
Engine Rebuild shop in Long Island NY
Does anyone know of a reputable Porsche machine shop for a Porsche 911 3.2 (1986) hearing nightmares about several machine shops.
|
||
![]() |
|
Moderator
Join Date: Dec 2001
Posts: 9,569
|
The only one we use in the Northeast is Verden Tool in Dover, New Jersey. The pros have carefully cultivated them for a couple decades. What precisely do you need?
__________________
'66 911 #304065 Irischgruen ‘96 993 Carrera 2 Polarsilber '81 R65 Ex-'71 911 PCA C-Stock Club Racer #806 (Sold 5/15/13) Ex-'88 Carrera (Sold 3/29/02) Ex-'91 Carrera 2 Cabriolet (Sold 8/20/04) Ex-'89 944 Turbo S (Sold 8/21/20) |
||
![]() |
|
Registered User
Join Date: Jul 2013
Posts: 3
|
I need a shop that will polish the heads, polish the crank shaft and balance( rods pistons etc.)
|
||
![]() |
|
Moderator
Join Date: Dec 2001
Posts: 9,569
|
Heads = Anchor Atlantic Enterprises
Bouffant hairdos, Miranda, Grace Slick and THESE HEADS Crank shaft micropolish = any machine shop, this is not a huge deal as long as they can measure and don't take too much off. Verden can handle certainly. Static balance stuff = Verden. We don't really bother with dynamic balance like the V-8 crowd, you can do a lot yourself by weight matching individual components with an inexpensive balance. Bored? You'll think about stroking when you see these rods. Good luck and have fun!
__________________
'66 911 #304065 Irischgruen ‘96 993 Carrera 2 Polarsilber '81 R65 Ex-'71 911 PCA C-Stock Club Racer #806 (Sold 5/15/13) Ex-'88 Carrera (Sold 3/29/02) Ex-'91 Carrera 2 Cabriolet (Sold 8/20/04) Ex-'89 944 Turbo S (Sold 8/21/20) |
||
![]() |
|
Irrationally exuberant
|
Certainly have the heads rebuilt but don't modify them. 3.2 heads already flow enough for 300hp.
__________________
'80 911 Nogaro blue Phoenix! '07 BMW 328i 245K miles! http://members.rennlist.org/messinwith911s/ |
||
![]() |
|