|
|
|
|
| Author |
|
|
Registered User
Join Date: Jul 2013
Posts: 3
|
Camshaft
Hello out there! Doing a rebuild on a 3.2 and I'm up to putting left camshaft in housing. I dry tested first and it was tight, then tried it with a little oil on it and it turns smoothly, is this something to be concerned about before I continue?
|
||
01-03-2014, 04:39 PM
|
|
|
Registered
Join Date: May 2004
Location: Boulder, Colorado
Posts: 7,275
|
I don't think I have ever put a cam in dry, so I don't have direct experience. I always put the cam in before I finish torqueing the head studs anyway, just in case some loosening and retightening is needed to be sure it turns freely. But my 2 cents is not to worry if, with a nice coat of assembly lube on it, it turns smoothly.
|
||
|
01-03-2014, 05:49 PM
|
|
