|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2011
Posts: 271
|
Weber carbs setting 2,0 Solex
Hello,
can anyone tell me which jets, emulsion tubes, venturis,... I should take for a 1965 2,0 engine with solex cams and 40IDA Weber carbs? Many thanks, best regards Malte |
||
03-26-2014, 11:40 PM
|
|
|
Registered
Join Date: Feb 2004
Location: UK
Posts: 2,230
|
Malte - Hi
Venturi - 30mm Main Jet - 125 Air Corrector - 180 Emulsion Tube - F26 Idle Jet - 55 Idle Air Bleed 110* Should get you close. * The size of the bush fitted into the carb may differ depending on the body you have. It may be worth think about fitting tuneable Idle Air Correctors We have a new system for our carbs - We pull the bush out of the carb and slot drill a shuled so we can fit a short M4 Timesert  We can then screw in a calibrated jet to a controlled depth as the jet we use has a small shoulder  
|
||
|
03-27-2014, 02:03 AM
|
|
|
Registered
Join Date: Mar 2011
Posts: 271
|
Hello Chis,
thank you for the answer and sorry for the late reply! -I was in Essen (Techno Classica) the last week. I have your idel air bleed/callibrate screws in my 46 webers and they are working very good! |
||
|
03-31-2014, 01:57 AM
|
|
