|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2014
Posts: 223
|
Aircon
So I bought an engine with aircon compressor installed. is it easy to remove this and do I have to change anything else apart from the drive pulley?
can't use the aircon on the VW Bus it's going into! |
||
02-19-2015, 09:59 AM
|
|
|
Registered
Join Date: Dec 2007
Location: Just a little north of 13669/Nation's capital
Posts: 1,285
|
Sounds like you don't have to worry about evacuating any refrigerant so removal is as simple as Take out the bolts and you're done. Unless you have a clearance issue, no good reason to change out the pulley. The (sleeper) bus will surprise a few people!
__________________
1986 Targa Guards Red 2021 MT09 SP |
||
|
02-19-2015, 03:15 PM
|
|
|
Registered
Join Date: Aug 2014
Posts: 223
|
Fantastic thanks. Didn't know if I was over simplifying things!
yes, should be a cool sleeper bus. Just need to get the suspension and brakes to the same level as the engine! Thinking of 986 brakes all round. |
||
|
02-20-2015, 04:01 AM
|
|
