Quote:
Originally posted by Shawzy
- what is the best/easiest route?
|
I've done this for other things.
I like the pass side, next to the hump, up off the floor. if a few wires then I lay them flat and elec. tape a flat group. then some duct tape to keep them up off the floor. then gently shape them thru the rear cover and out to the tranny area.. zip ties inside the coupler area to keep the wires to the side. then a round bundle with plastic spiral or the slit wire conduit in the tranny area.. then into eng comp fuse panel area for a connector so I can drop the engine without having to deal with a direct wire feed.. I always use marine grade wires and solder everything...........Ron