[targa80]

Ryan:

This is from the Work shop wiring diagrams for the 81SC OXY control wiring. On the schematic there are 2 red wires and one red/wht wire.

first red wire starts at contact 30 of Oxy sensor relay and goes to fuse 18 (5A) a blk wire from the clock is also connected to the same terminal on the fuse.

Second red wire Starts at the OXY test connector and goes to fuse 22 (25A) there is also a red/blk wire attached to the same terminal on the fuse.

Red/Wht wire starts at terminal 86 on OXYsense relay and connects to a harness connector from there it goes to terminal 30 of the fuel pump relay. A blk wire is also connected to terminal 30 of the relay.

I could not find any other wires of that color combination in the diagrams for the OxY sensor circuits. Is it possible that this connector with the 2 wires is for some other use and not the O2 sensor circuits.