View Single Post
Alexm930 Alexm930 is offline
Registered
 
Alexm930's Avatar
 
Join Date: Sep 2011
Location: New Hampshire
Posts: 424
Garage
Quote:
Originally Posted by darrin View Post
Alexm -- How bad is your rubbing -- a lot of us with non-wide body 911s that run 16x7 fuchs up front end up with minor rubbing (the tire pulls out the inner fender lip when it makes contact with the lip, but not fender itself) -- rolling the inner fender lip in on the offending side solved this issue for me and left no visible evidence. Others have shaved the inner fender lip off to achieve the same effect. If you're not distorting the fender itself, a combination of fender rolling and negative camber could get you there
Thanks for the input Darrin, Exactly as you stated, it is just ever so little bit on the lip & pulls it out juuuuust that little. I will try camber adjust first as it seems mine is 0 degrees. Then if worst scenario do the fender roll as much as it scares me.
__________________
Speedlimits are for the guidance of wise-men & the obedience of FOOLS!
Old 05-18-2017, 10:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)