thanks for your suggestion, but i'm somewhat confused. Which plastic knob are you referring to? I'm assuming red knob and plastic knob are one and the same but again not sure I know what are you referring to. Thanks again
Quote:
Originally Posted by tcar
put an adjustable crescent wrench on the metal lever... not quite tight against the metal.
Slide to touch the plastic knob.
Tap the wrench lightly with a small hammer, toward the knob. Tap until the knob loosens.
You can re-dye the red knobs with RIT dye (red) in hot water, will last forever.
Fill the indented arrows, etc. with white out, wipe off.
Voila'.
|