Quote:
Originally posted by yipekiya:
Pulling the engine on my 951 Engine will come out of Bel Housing by about 1" and the it feels like something is holding it on the right lower side...Am I missing something Ihas trying to pull it with the crossover pipe, turbo and downpipe on. I have unbolted the two halves of the downpipe. I am getting angry...much more of this and I will part her out..LOL
|
hi. you will have to look up the turbo side of the engine on the bellhousing, for a small bolt to take out, then just below the bolt is a hole with thread's in . with the bolt out, put a long bolt into the thread's and pull the shaft out of the bellhousing, to release the clutch release fork. then pull the engine/ bellhousing apart.
good look mike.