Quote:
Originally Posted by FJ40runr
....With that in mind...is there a suggested best practice as far as order of assembly for the rear end? !
|
Make sure you thread the wires for the license plate lights into the bumper pads before you button it up. I usually do the threading first so I don't forget.
Also don't tighten everything up until you have the rubber side skirts attached on all the studs. Also leave these loose until the bumper is tightened then return to them.
Visually check the alignment and side-to-side height before final tightening. You can use your knees to tweak/re-align as needed.
Bill K