|
|
|
|
| Author |
|
|
Registered
Join Date: Jun 2006
Location: Minnesota, USA
Posts: 2
|
datastream readings
I'm looking for data for a 740I. The engine seems to be getting way too much fuel. I measured the injector pulse width at idle with a digital scope and it's about 6.8 milliseconds. This seems way too long. does anyone know what normal pulse width should be at idle with the engine at operating temp?
I would also like to find out what a normal Mass air flow reading is at idle. |
||
06-27-2006, 09:11 PM
|
|
