![]() |
|
|
|
The Unsettler
|
911 Tech Forum
Haven't had a need to visit it in 15 years till last week.
It's an interesting dynamic. Obviously my observation is limited to basically only paying attention to it for the last week so admittedly I could be way off base here. With a couple of exceptions it seems there are two, well three, types of posters. Newbs with little to no knowledge looking for help. People who have been around a bit and seem to only parrot stuff they've read / have seen posted frequently but really don't have first hand knowledge or experience with. The people who really know their **** but have forgotten how to share their knowledge with people who have none. In that they give answers that require underlying knowledge that the person, typically a newb, doesn't posses. Don't know how that one really gets handled properly because the rabbit hole is deep. The other interesting thing is it's almost as if there is too much accumulated knowledge. The search feature is almost not useful any longer. The depth of accumulated knowledge over the decades renders search almost like an entire library with 1,000 books on a single topic.
__________________
"I want my two dollars" "Goodbye and thanks for the fish" "Proud Member and Supporter of the YWL" "Brandon Won" |
||
![]() |
|
Registered
|
I was going to say, almost every question possible has been answered.
__________________
2021 Model Y 2005 Cayenne Turbo 2012 Panamera 4S 1980 911 SC 1999 996 Cab |
||
![]() |
|
Still here
|
Quote:
After 15 years, you probably have observed that many times over. |
||
![]() |
|
Brew Master
|
I've used the search function with pretty good success. But the tech section has been bogged down by a lot of new owners who seem to not use the search function prior to posting. There aren't many questions on the SC or Carrera that haven't been gone over at least twice in the tech section.
When I experienced my mechanical over rev, I chose to do some searching to see what the end result was. Looking for mechanical over rev and money shift provided a few results but didn't really cover what was found in the end. So I started a thread linking other threads in an effort to make it one stop shopping. I think it would be helpful to join threads or make one master thread on things like 3.2 won't start.
__________________
Nick |
||
![]() |
|
Registered ConfUser
Join Date: Aug 2006
Location: Waterlogged
Posts: 23,552
|
Haven’t visited there in years either but interesting that there are lots of new owners seeking DIY support. Considering that these are no longer reasonably attainable by regular working folks, Im pleasantly surprised that new owners who likely forked out well north of $50k for a hobby car are doing their own work.
They need what we had....guys like EarlySMan.
__________________
Mike “I wouldn’t want to live under the conditions a person could get used to”. -My paternal grandmother having immigrated to America shortly before WWll. |
||
![]() |
|
Registered
Join Date: Jul 2004
Location: Maryland
Posts: 31,508
|
Quote:
Since I bought the Land Cruiser three years ago, I have spent a lot of time on IH8MUD. https://forum.ih8mud.com/forums/80-series-tech.9/ They do a really good job on making tech support accessible for the Newbs (me) by collecting common tech questions in a sticky with links to the information.
__________________
1996 FJ80. |
||
![]() |
|
![]() |
Registered ConfUser
Join Date: Aug 2006
Location: Waterlogged
Posts: 23,552
|
What did we do before the Internet? Every car/bike I buy requires weeks of pouring through the search function on their respective forums. Has made life so much easier...and costly mistakes so much rarer.
__________________
Mike “I wouldn’t want to live under the conditions a person could get used to”. -My paternal grandmother having immigrated to America shortly before WWll. |
||
![]() |
|
Registered
Join Date: Mar 2005
Location: Northern CA
Posts: 4,703
|
I agree with this. Compared to other car forums the PP 911 tech forum is by far the best I've seen in terms of quality of information and how people are treated.
__________________
Sold: 1989 3.2 coupe, 112k miles |
||
![]() |
|
Registered
Join Date: Jul 2004
Location: Maryland
Posts: 31,508
|
Quote:
I have the big shop manual (came with the truck) and never use it as a primary source other than to get the nomenclature right for searches. As to the OP, when I bought a 1983 SC Targa in need of work five years ago, I started back down the search path in tech support here. The information and insight was excellent and I never posted a request. In an odd twist, I was able to chart the scope and cost of the project in advance and decided to sell the SC before I started the work. I just wasn't up for that much effort and time. So, good on the youngsters!
__________________
1996 FJ80. |
||
![]() |
|
weekend wOrrier
Join Date: May 2011
Posts: 6,262
|
|||
![]() |
|
Preferred pronoun:Maestro
Join Date: Sep 2012
Location: Group W Bench
Posts: 11,359
|
Well, this "we", for example, wouldn't have undertaken a (quite successful, I might add) complete, split-case rebuild of his 930's engine before the internet.
Detroit V8s, even given the nuanced differences between marques, are a relative piece of cake - don't need no stinking internet - but I figured enlisting the help of the tech forum's expert might be a good idea the first time doing an air-cooled turbo. _
__________________
When in doubt, use overwhelming force. |
||
![]() |
|
The Unsettler
|
Side note.
I found last week that a google search is actually easier to mine the Pelican forums than the built in search. Every thread is indexed and seems to return better filtered results on phrase searches. Also easier to follow multiple threads in individual browser tabs.
__________________
"I want my two dollars" "Goodbye and thanks for the fish" "Proud Member and Supporter of the YWL" "Brandon Won" |
||
![]() |
|
![]() |
Get off my lawn!
|
I pop over the tech section on most every visit. I see a lot of posts that have indeed be asked and answered 100 times. And some really poor thread titles, like "car won't start".
Like ANY gathering of (mostly) men there will be difference of opinions and experiences. From total newbies to wise guru - sages like John Walker. If John Walker posts, I always read it carefully and he has forgotten more than most of us know about 911 repair. The search function on the forum software has always been pitiful. The classic example is before Pelican, I would never have dreamed of doing the suspension refresh on my 911. Seeing other guys, regular non mechanic, dentists or office workers tackle replacing all the rubber bushing on a 911 made me try it. I will never forget that punch in the gut feeling of walking out to my garage and seeing my 911 on jack stands, with no suspension and thinking "Glen, what the F**k did you do!" and one part at a time getting it back to together better then it had ever been in my ownership was very satisfying. All thanks to lots of post on the tech section.
__________________
Glen 49 Year member of the Porsche Club of America 1985 911 Carrera; 2017 Macan 1986 El Camino with Fuel Injected 350 Crate Engine My Motto: I will never be too old to have a happy childhood! |
||
![]() |
|
?
Join Date: Apr 2002
Posts: 30,498
|
I would not own a 911 if not for discovering Pelican tech two decades ago. Never a real car guy, much less DIY, I discovered a new world. I jumped in "head first" after a few months of browsing and learning .... learning that Pelican forums would point me right and bail me out
![]() But I know it's still there ![]() |
||
![]() |
|
Kind of Blue
Join Date: Sep 2010
Location: Delaware
Posts: 2,311
|
I've rarely found a question not already answered 20 years ago. Occasionally, I'll make threads for minor clarification to prior points as to not resurrect someone's issue from 2003 on a car they've likely moved on from a decade ago.
__________________
1971 911T w/ a 2.7 (ITBs, EFI, a bunch of other stuff, 2180 pounds with fuel) 2024 Ford Bronco Raptor |
||
![]() |
|
Registered
Join Date: Dec 2012
Location: Seattle
Posts: 8,943
|
It sure made your local PCA tech guy obsolete! They were pretty important to the diy set in the 70s to 90s as far as I can tell from reading the old magazines.
__________________
1982 911 Targa, 3.0L ROW with Webers |
||
![]() |
|
Registered
|
Quote:
There is a depth of knowledge there as well BUT I pity the fool that doesn't do a search before posting a question. And even if they have searched but can't find an answer or just ask the question after not understanding the results of a search, the typical response comes with a flame thrower aimed at the poster. The other thing I've noticed on the LR forums and occasionally on PP, is posters have a question and issue, it gets batted back and forth with replies and recommendations. Then at some point offline the poster finds the solution but never posts what they did to resolve their problem.
__________________
Matthew - drove Nurburgring with wipers on and no rain 1969 911E SOLD ![]() 2002 996 Cabrio 1995 993 Carrera 4 SOLD 2004 Land Rover Discovery II G4 Edition (Sold ![]() |
||
![]() |
|
Registered
Join Date: Apr 2005
Location: outta here
Posts: 53,429
|
PCA was the repository of all useful technical information in the years before things like the Internet. There were annual technical seminars in several parts of the country, the most notable of them being the Warbonnet ones in Oklahoma. All of the big name Porsche gurus in the US, along with some from overseas, showed up and a good time was had by all.
Panorama magazine kept us abreast of new developments. I miss those days. |
||
![]() |
|
Get off my lawn!
|
Quote:
It all started in one man's garage doing a clutch job on a 356. When Helmuth Bott came to talk, we were almost as big as Parade.
__________________
Glen 49 Year member of the Porsche Club of America 1985 911 Carrera; 2017 Macan 1986 El Camino with Fuel Injected 350 Crate Engine My Motto: I will never be too old to have a happy childhood! |
||
![]() |
|
Registered
Join Date: Apr 2005
Location: outta here
Posts: 53,429
|
Bott was my hero. I liked Metzger and Tony Lapine, too.
Chuck Stoddard, Bob White, Bruce… |
||
![]() |
|
![]() |
Thread Tools | |
Rate This Thread | |
|