Small circular saw reco's...
 

I'm going to be working on a project for my wife. It involves painting some 2'x2' boards with patterns in different colors. She has these mounted on the fence as art for the garden.
What I had in mind is cutting the 'lines' between the colors about 1/8" deep so I could paint them black easily. Just lay the paint in the groove type of thing.
What I'm looking for is recommendations for a small, easy to handle circular saw that could do it. I borrowed a friends Skil saw but it weighs a ton and would be like using a sledge hammer to put in a tack, IMO.
What do you guys use/recommend?
I'd use it to make model train loads out of small wood after this project is done.

Here's a shot of what I'm trying to replicate.
http://forums.pelicanparts.com/uploa...1681665215.JPG
I've already purchased the 2x2 pieces. They're 1/2" thick and sanded on one side type plywood.

The straightest cut would be made using a table saw. An even bigger sledgehammer, but you could do a whole bunch of cuts in a few minutes.

I have a hand-held circular saw with a blade about 3" in diameter. Dremel brand. Corded. The blade has a REALLY narrow kerf. It might not be easy to get paint into that cut.

I have a friend whose wife makes barn quilts.

I don't have a specific recommendation, but I'm thinking something battery powered and with one of the little blades (4 1/2" I think).

My wife makes quilts. Don't know if they qualify as barn or not, but she has lots of 'em.

I like the Harbor Freight 20v Bauer saw. There are also compact/mini circular saws available (4-1/2" blade) but I have not used one.

I would use a table saw or a trim router for making 1/8" grooves.

I'm willing to spend the time to set up an edge to follow with the saw. I'm just not sure a really 'cheap' HF saw will work or if I should spend a little more to avoid frustration and such.

Is something like this:
https://www.harborfreight.com/58-amp-4-12-in-compact-circular-saw-56164.html
Going to be powerful enough to not get bogged down going 1/8" deep?

Use a guide and run a Dermal with a small 1/8" straight cut blade. The cut is only about 1/8" deep? I think they come with a flat base that allow it to be used like a small router. Safe to use and its not too powerful and easy to handle. Guild it along a piece of wood with couple clamps. Table saw with a miter gauge is the easiest if you can access one.

<iframe width="1280" height="720" src="https://www.youtube.com/embed/dEHi3kpWUyw" title="How to Use the Dremel 565 Multipurpose Cutting Kit / Router Attachment" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

I’m love my small Makita battery circular saw. Light weight and plenty of power. Being a hand held saw, accuracy can vary. Some Skill is needed to cut straight…


Sent from my iPhone using Tapatalk

Yes. My dremel with the 3" blade has the flat base. Adjustable depth. Like the Bauer link above, only with a 3" blade. But again, the kerf is quite narrow compared to a regular-sized circular saw blade. The blade is made from what I would call sheet metal.

I think the ideal cut would be 1/4" wide and 1/8" deep, just enough to cut the veneer of the plywood but wide enough to give a good 'line' when looking at the designs.

If I was doing that, I'd use a 1/8" palm gouge and a straightedge. So much more control than if I was using a power tool....



http://forums.pelicanparts.com/uploa...1681666534.jpg

I could easily see that going right thru my hand herr_oberst. As my brother would say, I don't have a good history with tools like that.

1/4" is a WIDE kerf.

I can cut an absolutely straight line with my corded circular saw .... but it came with a mediocre blade originally. A friend (pro window/door installer) was using it at my house years ago.... said "put a good blade on it, and you'll have a good saw"...

I did and he was right :)

This one has been great for small lumber

https://www.tractorsupply.com/tsc/product/dewalt-20v-max-4-1-2in-cordless-circular-saw-dcs571b-1556866?cid=Shopping-Bing-Product1556866-&msclkid=0571796ec551175190cc1d52f3991180&utm_sour ce=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20All%20Products&utm_term=4585375807245420&utm_co ntent=All%20Products

Different size bits can be had. Its a shallow cut so the typical cordless Dremel will cut it like butter. I would use a router or lam. trimmer but its not a tool that get used often for most people whereas a Dermel is nice to have around.