Random TRANSPORTATION pictures

[porsche930dude]

[URY914]

[URY914]

[URY914]

[URY914]

[varmint]

[varmint]

[varmint]

[BE911SC]

Originally Posted by Racerbvd

[bugstrider]

Originally Posted by varmint

That's a bad spot to be in....




Sent from my iPhone using Tapatalk

[pavulon]

They flew that V-22 out of the sea and landed it safely after being several feet into the water. One marine bailed out and was presumed drowned. Both engines were toast. Apparently the engines were started in a run-mode not intended for flight.

Originally Posted by varmint

[Holger]

Originally Posted by pavulon

Apparently the engines were started in a run-mode not intended for flight.

Reminds me of this: Captain of TransAsia Flight 235 shut off working engine
Seems not only the pilot training outside of the US is in a sad state ;-)

[J P Stein]

Originally Posted by pavulon

JPIII, have you considered Webers? If so, is simplicity the reason you are running a Holley?

I've not really considered it. Simplicity is a good reason not the spend $4K on the Weber setup...... The Holley set up is about 1/4 of that. (but not near the cool factor)

I'm trying to avoid Porsche prices on the 65 and have been semi-successful. Mustang prices are about half or 1/3rd.....but there are a lot more issues to address.

[Brown747]

[ted]

Originally Posted by J P Stein

I've not really considered it. Simplicity is a good reason not the spend $4K on the Weber setup...... The Holley set up is about 1/4 of that. (but not near the cool factor)

I'm trying to avoid Porsche prices on the 65 and have been semi-successful. Mustang prices are about half or 1/3rd.....but there are a lot more issues to address.

Ford inline carbs for the Mustang? Must be pricey...

[URY914]

[porsche930dude]

Im getting one of my minibikes put back together. ts got an old 4 hp cast iron clinton engine, leaf spring front end and sliding pillar rear. All from scratch

[pavulon]

IIRC, the only small block manifolds made for these carbs mated to Boss heads--which were intended to be really high RPM running beasts.

Originally Posted by ted

Ford inline carbs for the Mustang? Must be pricey...

[URY914]

[URY914]