![]() |
|
|
|
Just thinking out loud
Join Date: Nov 2001
Location: Close by
Posts: 6,884
|
Mechanics pls. advise
Alright, alldata stinks, I hate it.
Here's the issue. I replaced the condensor, evaporator, front expansion valve, compressor, Aux air valve (rear a/c), rear expansion valve, dryer and tracked down an electrical problem that took about 2 hours of my time. I also flushed the system, vacuumed it down and charged it. I have no idea what the book time is for all those listed above except the actual time I spent on the electrical problem, with which I was very gracious, as I was with the 5 hours I spent building a hard line from the dryer to the condensor. I have 7 hours that I know are billable hours, but for the rest, I have no book times. So, if I may impose, what are the book times on replacing and servicing the rest? Again, condensor, evaporator, front expansion valve, compressor, Aux air valve for rear a/c, rear expansion valve, dryer, flush the system, vacuum it down and charge it. If I were to guess, it's about 21-22 hours total. Thanks.
__________________
83 944 91 FJ80 84 Ram Charger (now gone) |
||
![]() |
|
I'm with Bill
Join Date: Jun 2005
Location: Scottsville Va
Posts: 24,186
|
What kind of vehicle, that is important. Ans I agree alldata sux, I call it no-data
__________________
Electrical problems on a pick-up will do that to a guy- 1990C4S |
||
![]() |
|
Just thinking out loud
Join Date: Nov 2001
Location: Close by
Posts: 6,884
|
Doh! That might help. 1987 BMW L6, or 635CSI.
__________________
83 944 91 FJ80 84 Ram Charger (now gone) |
||
![]() |
|
Registered
|
"about a hundred dollars"
![]()
__________________
1967 911R "Clone" Race Car 2.0 & 2.5 Twin Plug 1984 Mercedes 500 SEC 1991 Mercedes 420 SEL 1992 Ford F-350 Dually 28' Pace Trailer |
||
![]() |
|
Just thinking out loud
Join Date: Nov 2001
Location: Close by
Posts: 6,884
|
I charged $200. Do you think that was a fair deal?
__________________
83 944 91 FJ80 84 Ram Charger (now gone) |
||
![]() |
|
I'm with Bill
Join Date: Jun 2005
Location: Scottsville Va
Posts: 24,186
|
You should have a return customer
__________________
Electrical problems on a pick-up will do that to a guy- 1990C4S |
||
![]() |
|
![]() |
Registered
Join Date: Nov 2000
Location: AZ
Posts: 8,414
|
I think that double that ($400) would have still been more than fair. Don't sell yourself (and your services) short!
|
||
![]() |
|
Still Doin Time
Join Date: Nov 2004
Location: Nokesville, Va.
Posts: 8,225
|
no-Data does not have that model/year labor listed, But I do play a BMW tech by day. I would say 18 billed hours for for all the standard replacement items to include evac + recharge. The hard line or custom work another 6-9 billed hrs
I've done this and those are fair times
__________________
'15 Dodge - 'Dango R/T Hauls groceries and Kinda Hauls *ss '07 Jeep SRT-8 - Hauls groceries and Hauls *ss Sold '85 Guards Red Targa - Almost finished after 17 years '95 Road King w/117ci - No time to ride, see above '77 Sportster Pro-Street Drag Bike w/93ci - Sold |
||
![]() |
|
abides.
|
I have some work for you. I'll even pay for your plane ticket to get out here.
__________________
Graham 1984 Carrera Targa |
||
![]() |
|
Just thinking out loud
Join Date: Nov 2001
Location: Close by
Posts: 6,884
|
Since school started yesterday, I can't committ to anything until the 15th of December, but I'll have my bags packed then, send the ticket.
The deal was squirrely. He brought his own parts, including two parts that we used on another car that had to get out of the shop. He bought those parts again from someone out there on the interweb and brought them when he dropped the car off. Prior to bringing in the car, he had bought a condensor from us and installed it himself. No big deal, except we sold him the wrong condensor which we would find out later when the high side pressures were through the roof. There weren't enough rows allowing sufficient surface area to cool the freon down. He/we waited 3 weeks to get the right condensor sent to us, that again, he bought on his own. I put it on, it was good to go. Come yesterday, the shop didn't want to honor a return on the condensor he bought from us in the beginning. Someone must have been having a bad day, I don't know, but I'm sure I made it worse when I told the shop that he wasn't going to pay the hugh chunk of change that is my labor. That's how you get a good deal. If someone feels like they are getting fuched, and I could tell this guy did, I'll make it right. I don't give a chit about the money.
__________________
83 944 91 FJ80 84 Ram Charger (now gone) Last edited by mattdavis11; 08-26-2008 at 01:30 PM.. |
||
![]() |
|
abides.
|
Sorry, I was mostly kidding when i said that.
But he certainly got a good deal, and kudos to you for going the extra mile to keep the customer happy.
__________________
Graham 1984 Carrera Targa |
||
![]() |
|
![]() |
Thread Tools | |
Rate This Thread | |
|