![]() |
|
|
|
Registered
Join Date: Apr 2002
Location: Omaha, NE
Posts: 3,518
|
Aftermarket shifter boot Question
I just installed a new Momo Combat knob and boot. Should I just place the new leather boot over the old rubber one or take the rubber one out? I put the new one over the old one but it seems to not quite cover everything and creeps up when shifting. Thanks
__________________
1980 911SC Targa 3.6L |
||
![]() |
|
Registered
Join Date: Jul 2001
Location: Lawrenceville GA 30045
Posts: 7,378
|
The instructions that came with the leather boot I purchased a while back stated to install it over the rubber boot. Of course, I read this, AFTER i had removed the rubber boot and had slid the leather boot over the shifter. After install, it did have a tendency to creep up - like you're reporting. I have since loosened the console base and was able to pull the bottom of the leather boot further down over the rubber boot and is now held down (very tightly) by the console.
__________________
Mark '83 SC Targa - since 5/5/2001 '06 911 S Aerokit - from 5/2/2016 to 11/14/2018 '11 911 S w/PDK - from 7/2/2021 to ??? |
||
![]() |
|
Registered
Join Date: Apr 2002
Location: Omaha, NE
Posts: 3,518
|
Great--I'll do the same--thanks for the quick response.
__________________
1980 911SC Targa 3.6L |
||
![]() |
|