bowden cable routing to frunk?

[wareaglescott]

79 SC

Removed the entire control unit and bowden cables. Should have paid better attention when I was taking it out. Do the cables route under or over the steering column?

Thanks

[yelcab1]

Bowden cable for the clutch? what are you talking about?

[wareaglescott]

Originally Posted by yelcab1

Bowden cable for the clutch? what are you talking about?

Sorry. The 3 from the air control sliders that route up into the frunk.

[wgirardot]

Originally Posted by wareaglescott

Sorry. The 3 from the air control sliders that route up into the frunk.

This pic may help


Bill

[wgirardot]

Originally Posted by wareaglescott

Sorry. The 3 from the air control sliders that route up into the frunk.

This pic may help

[wgirardot]

Just verified for sure. They enter the frunk from below the steering column

Bill

[wareaglescott]

Originally Posted by wgirardot

This pic may help

Not in the least bit! haha. I know how they enter the frunk area just wasn't sure if after leaving the control unit if they went above or below the steering column before going through that hole you show.
I see in the next post you verified they go below. Thank you very much for looking. That is very helpful. Luckily I routed mine below so will not need to redo anything.