Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum

LinkBack Thread Tools Rate Thread
Thread Post New Thread    Reply
Join Date: Nov 2000
Location: Longmont, Colorado
Posts: 1,829
need help finding 35mm intake gaskets

I'm trying to reassemble the induction on a race motor with carbs

went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash....

unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks

So the heads have been worked, and the Intake Port is 35mm

looking through different years of factory ports... I see the early S cars are 36mm

but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly....

does anyone know where they could have come from?
I'd like to buy 35mm Intake gaskets

looking at the 2.7 gasket pictured here on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up

can anyone help guide me?

thanks in advance

914/6 2.0S with twin plug
all metal body panels
19quarts of oil
4 gallons of gas
and 1826 lbs (wet)
Old 05-23-2020, 06:45 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Join Date: Nov 2003
Location: Tucson, AZ
Posts: 976
I had the same problem and finally gave up and bought a sheet of intake gasket material and made my own. They fit better than the factory gaskets in that I cut them to match the out perimeter of the heads, injector blocks, insulators and intake.

Good luck!

1987 Marine Blue 911 Carrera Coupe RIP 01/2011
1987 Black 930 RUF Coupe Resurrected, 2488 lbs, EFI Technology, UMS Tuned - Mild & Wild, Current in pieces at paint
Old 05-24-2020, 06:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)

Thread Tools
Rate This Thread
Rate This Thread:


All times are GMT -8. The time now is 07:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2020 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.