|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2003
Location: RI
Posts: 906
|
Ignition rotor issue
I have an issue with my ignition rotor. The old rotor died ( no continuity from center to tip) I thought noting of it and replaced the cap and rotor which fixed the problem.
About a hundred or so miles later the engine quit again so I went straight to the cap and rotor. I found the rotor to be at fault again (no continuity). The only thing I can think off that has changed ignition wise, is I replaced the sparkplugs before the rotor resistors started frying.. 1980 911 SC 3.0, stock CDI and stock sparkplug wires in great condition. New NGK plugs BR7EIX - 6664 6664 Anyone experienced this issue before?
__________________
Silver 1980SC Euro coupe |
||
11-15-2025, 03:41 PM
|
|
|
Registered
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,516
|
Napa rotor with no resistor?
__________________
https://www.instagram.com/johnwalker8704 8009 103rd pl ne Marysville Wa 98270 206 637 4071 |
||
|
11-15-2025, 04:58 PM
|
|
|
Registered
Join Date: Aug 2003
Location: RI
Posts: 906
|
Thanks John, I'll give that a try.
__________________
Silver 1980SC Euro coupe |
||
|
11-15-2025, 06:29 PM
|
|
