Source or Borrow Splined Tool for Trans. Mainshaft Peened Bolt

[Gonbad]

I am looking for the source for the tool or if someone has the tool that would let me borrow it. I am willing to supply a deposit on said tool.

This is the tool that is splined to match the front end of the main shaft for the 915 transmission that safely holds it to loosen the peened bolt that holds on 3rd and 4th gear sets and synchros.

Alternative someone with a thrashed 5th/Reverse hub that I can put in a vise for the same process.

I live in Spring, TX - Houston suburb.

[Gonbad]

This piece:

[john walker's workshop]

Impact wrench.

[Mark Salvetti]

Or make your own tool. Easy to do if you have an old clutch disk to sacrifice.

Mark

[Gonbad]

Originally Posted by john walker's workshop

Impact wrench.

I know to get that first peened bolt off. I am talking about the second one further down the shaft that holds third and forth gear on.

[Gonbad]

unfortunately I don't have an old clutch disk.