![]() |
|
|
|
Registered
|
Very simple question about 930 calipers
Ok, so I'm allowed at least one really stupid question when starting a new project...
I just bought used 930 calipers to put on my 86 Carrera. I've got to send the rears off to be machined so they'll bolt up on my car. How do I tell which are the rear calipers and which are the fronts? I've only looked at the calipers in my dark little car port in a box and all 4 looked pretty similar. I didn't see two big ones and two obviously smaller ones... (I told you it was a stupid question) Thanks in advance, Dean
__________________
'86 Carrera cab (euro) Spec Miata |
||
![]() |
|
Too big to fail
|
The pistons on the rear calipers are smaller
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had." '03 E46 M3 '57 356A Various VWs |
||
![]() |
|
Registered
|
Ahhhh! Thanks, Thom. I have a feeling you'll be answering many questions for me in the coming weeks as I complete this swap...
Damn, I'd like to see your car and your setup! Maybe I'll try to get to T-Hill early enough on Friday to check out your conversion... Dean
__________________
'86 Carrera cab (euro) Spec Miata |
||
![]() |
|