![]() |
|
|
|
Rennch on YouTube
|
Warren...more great advice. Pat S. and I spread the 14 pin, and it seemed to work well...for a while. I can't help but think it's something somewhere else though. We cleaned the connections, spread them, and hit them with Dialectric grease. But that was the 14 pin from the back (or front) of the engine compartment. So, I'll start with that one for today's endeavor.
Thanks, mto
__________________
Michael O'Neal - 69 RSR Clone(ish) - The build: http://bit.ly/69porschersr 69 911S Blasphemy Build on YouTube Rennch Youtube Channel: http://rennch.com/Youtube Instagram: https://www.instagram.com/_rennch_/ |
||
![]() |
|
Registered
|
![]()
mto,
The Blue wire has to pass thru BOTH sets of 14-pin connectors!
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
![]() |
|
Registered
Join Date: Apr 2003
Location: Tampa FL
Posts: 798
|
Sorry, I couldn't make it. I spent the day running different wires... I added two seperate circuits for my compressor and my welder to my basement and garage. Now hopefully I can use both without tripping the breaker.
![]()
__________________
Current: 07 S4 Avant, 06 Volvo S60R Sold: '74 911, 01 986, 93 Volvo 240 |
||
![]() |
|
Rennch on YouTube
|
Well...after hours and hours of work, I have a nice bright alternator light when I turn the key, that promptly goes out. I also installed a blank where the radio is supposed to go and installed a VDO Voltage gauge. Right now it's reading perfectly, and the car is running great. BUT>I've been down this road before. We'll see if it sticks. I'll take some pics of the Gauge install if anyone wants to see it.
Thanks for all the help!
__________________
Michael O'Neal - 69 RSR Clone(ish) - The build: http://bit.ly/69porschersr 69 911S Blasphemy Build on YouTube Rennch Youtube Channel: http://rennch.com/Youtube Instagram: https://www.instagram.com/_rennch_/ |
||
![]() |
|
Rennch on YouTube
|
Well...the gremlins strike again. 5 minutes into the first longer test drive, the lights dim, and the gauge drops to less than 12 V. It stayed that way the whole rest of the night.
Anyone want to buy a Porsche? Sigh...
__________________
Michael O'Neal - 69 RSR Clone(ish) - The build: http://bit.ly/69porschersr 69 911S Blasphemy Build on YouTube Rennch Youtube Channel: http://rennch.com/Youtube Instagram: https://www.instagram.com/_rennch_/ |
||
![]() |
|