Picture of “Ruf” style spoiler with the center mounted oil radiator.

[caliber60]

Any body has the picture of the “Ruf” style spoiler with the center mounted oil radiator? Where can I buy one?

[KTL]

Above is Bill Verburg's car with BW Motorsports fiberglass replica piece (good quality, great guy- Brad Stubbs 618-622-0524) and a B&B oil cooler.

And you gotta visit the Ultimate RUF Conversion Topic

[Scooter]

Here is Randy P's with an authentic RUF valance:


If you are looking for an authentic RUF valance (poly not fiberglass) instead of the whole fiberglass bumper like Bills, give me a PM.

[Bill Verburg]

Not to burst your bubble but the Ruf bumper caps were the same construction as mine.

The valances were p/u w/ an integral oil cooler.

A more recent pic.

ruf 930 valance w/ the inner cooler mount

The Ruf cooler



The B&B cooler I used is a dual pass unit which provides superior cooling to the Ruf single pass, The Ruf cooler will fit much better, The Ruf parts are a lot more money. Either way will provide an excess of cooling capacity. My 3.8RS runs ~185&deg F at all times. A final advantage of the cap w/ separate chin spoiler is that the depth of the spoiler can be adjusted to suit. The p/u chin is an integral 1 piece fixed depth unit.

[Scooter]

Originally posted by Bill Verburg
Not to burst your bubble but the Ruf bumper caps were the same construction as mine.

The valances were p/u w/ an integral oil cooler.

Not sure who's bubble we are talking about here, but I completely agree with Bill. The poly valance is a very nice unit. It sits low to the ground, but can take the impacts, because it is so flexible.

I have to say Bill, I hate looking at your car. I really hate looking at your car. Every time I look at it, I want to put those bumpers on myself.

[rdane]