|
|
|
|
| Author |
|
|
Registered
|
Used underbelly condensor...
I have a chance to pick up a used, including all hoses and fittings, underbelly condensor from a guy who just upgraded to a Griffiths system.
Plus, the folks who installed his Griffiths will install this for me. Tempting...indeed. Plus I see folks seem to like the underbelly condensor. What would a reasonable price, assuming the system is in good condition, price be for the condensor..?? Phattey....
__________________
'87 911 '95 4Runner '05 Screamin Eagle ElectraGlide |
||
08-11-2004, 05:32 AM
|
|
|
Registered
Join Date: Dec 1999
Location: Richmond, VA USA
Posts: 1,058
|
If you plumb the belly condener between the Griffiths left rear condenser and the drier, rearrange the condenser's fittings.
Move the inlet (on the right side) to the left side, pointing to the rear. Turn the outlet (on the left front) around so it faces forward. That makes it a straight-thru plumbing job. |
||
|
08-11-2004, 02:22 PM
|
|
|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 14,643
|
I recently purchased a used under belly condensor and the barrier hoses that went with it for $300.00 including shipping off E-Bay,I am making it my winter project.
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler . |
||
|
08-11-2004, 05:04 PM
|
|
|
Registered
Join Date: May 2002
Location: Kansas City, MO USA
Posts: 595
|
What is the size of the condensor?
__________________
80 930 67 Triumph TR4a irs 72 DeTomaso Pantera 75 911 3.3 Turbo Cab*SOLD 5-11-04 73 911T Went Up in a Blaze Glory, 76 Early Ford Bronco |
||
|
08-11-2004, 06:22 PM
|
|
|
Registered
Join Date: Mar 2002
Posts: 3,563
|
8' x 4' I think. I have one sitting at home. Will install it when nearing summer
__________________
Merv '89 911 Turbo Cab Protomotive MAP ECU, Twin Plugged Heads, GT2-EVO CAMs, 3.3L fully finned P&C's, ARP fasteners, C2T head gaskets, Titanium Retainers, Turbo spec valves, springs & guides, 964 splash valves, GT35R BB turbo, GSF Stainless Headers, Magnaflow Exhaust, Full bay Intercooler, TiAL 46mm w/gate, TiAL 50mm BOV, Apexi AVC-R EBC, SPEC Stage3+ Clutch kit, Crane CDI Ignition 
|
||
|
08-11-2004, 08:28 PM
|
|
|
Administrator
Join Date: Feb 2000
Location: Los Angeles
Posts: 13,333
|
Just make sure it's the stainless steel model that Performance Aire sells. An ordinary condenser is going to get destroyed, down there.
__________________
Jack Olsen 1972 911 My new video about my garage. • A video from German TV about my 911 |
||
|
08-11-2004, 10:19 PM
|
|
|
1987 Porsche 911 3.2
