|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2004
Location: Burlington, Ontario
Posts: 631
|
MFI part #S
Does anybody have a listing of part #s for MFI stacks, throttle bodies and injection pump for 2.4 T thru S.
Thanks, Joe |
||
10-27-2004, 11:08 AM
|
|
|
Moderator
Join Date: Dec 2001
Posts: 9,569
|
Look in Check, Measure Adjust for the pump part #'s.
__________________
'66 911 #304065 Irischgruen ‘96 993 Carrera 2 Polarsilber '81 R65 Ex-'71 911 PCA C-Stock Club Racer #806 (Sold 5/15/13) Ex-'88 Carrera (Sold 3/29/02) Ex-'91 Carrera 2 Cabriolet (Sold 8/20/04) Ex-'89 944 Turbo S (Sold 8/21/20) |
||
|
10-27-2004, 11:16 AM
|
|
|
Registered
|
Here are the pump numbers. They are from page 44 of Check, Measure, Adjust. As John mentioned you should get a copy of CMA, which you can download from the link in my signature area.
__________________
'70 911S 1002938 '70 Ducati Mark 3D 350 Last edited by derek murray; 10-27-2004 at 01:12 PM.. |
||
|
10-27-2004, 01:09 PM
|
|
|
Registered
Join Date: Sep 2004
Location: Burlington, Ontario
Posts: 631
|
thanks Derek, anybody have #s for stacks and/or throttle bodies?
thanks, Joe |
||
|
10-27-2004, 05:16 PM
|
|
|
Registered
Join Date: Apr 2001
Location: Linn County, Oregon
Posts: 48,556
|
For the 2.4 years, S and RS were the same for stacks. Not sure about TB's...so when parts shopping, check numbers for each...
|
||
|
10-27-2004, 05:26 PM
|
|
|
Registered
Join Date: Dec 1999
Location: TX USA
Posts: 9,804
|
2.4T L-TB 911.110.081.10 R-TB 911.110.082.00
2.4E L-TB 911.110.083.10 R-TB 911.110.084.00 Stack 911.110.065.02 2.4S, 2.7RS L-TB 911.110.085.10 R-TB 911.110.086.00 Stack 911.110.063.02 The T-E USA engine was an afterthought that was not completely documented in the parts catalog!
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
|
10-27-2004, 06:12 PM
|
|
|
|
Registered
Join Date: Sep 2004
Location: Burlington, Ontario
Posts: 631
|
Warren, thanks for the info. Just wondering if you have any inputs on what I'm trying to do. I've just pulled the motor and will begin teardown this weekend
-2.4T motor (not sure of condition of Ps&Cs yet) - addition of E stacks and TBs -Cams ? -stock heads(still not sure whether they are 32mm ports or not) some people say 30 waynes book says 32 - stock T injection pump ? Thanks, Joe |
||
|
10-28-2004, 05:08 AM
|
|
