|
|
|
|
| Author |
|
|
Registered
Join Date: May 2003
Location: San Diego, CA
Posts: 191
|
Is the the right CV Boot?
I just got some new CV Boots and the new ones have a thin peice of sheet metal where the old ones had a 3/8" thick peice of metal. Are these the right ones and if so will I need to space out the bolts when I put them back on?
Thanks, Jesse  
|
||
10-30-2004, 10:25 AM
|
|
|
Registered
Join Date: May 2003
Location: San Diego, CA
Posts: 191
|
For those who find themselves with one of these after market boot kits, here is what I did. I cut off the flange that holds the boot on with a cut off wheel and then the old flange peice fits into the new boot sleeve. This give the arrangement the proper thickness.
Jesse 76 911S  
|
||
|
10-30-2004, 03:33 PM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
