|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2004
Location: Houston
Posts: 1,486
|
Grady where is the Air control screw?
Grady.... and the Forum,
I am going though the CMA , and I need to Synchronizing throttle bodys. Were is the Air-correction screw? Thanks Derek ALso do I need to do the timing with the vacumm off?
__________________
Derek Oxford PCA - Nationally Certified Instructor 2002 Boxster S ( race car) 2010 LR4 2009 GMC Sierra (Porsche Support 2011 M3 4Door |
||
01-15-2005, 10:08 AM
|
|
|
Registered
Join Date: Dec 2003
Location: Arapahoe County, Colorado, USA
Posts: 9,032
|
Derek,
OK Where in CMA are you looking? What page? I think I know what you are asking. I’ll bet this is a German-to-English translation issue. Ignition timing is usually done with the vacuum advance/retard in place. Best, Grady
__________________
ANSWER PRICE LIST (as seen in someone's shop) Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
||
|
01-15-2005, 10:36 AM
|
|
|
Registered
Join Date: Feb 2004
Location: Houston
Posts: 1,486
|
page 22
__________________
Derek Oxford PCA - Nationally Certified Instructor 2002 Boxster S ( race car) 2010 LR4 2009 GMC Sierra (Porsche Support 2011 M3 4Door |
||
|
01-15-2005, 11:00 AM
|
|
|
Registered
Join Date: Dec 2003
Location: Arapahoe County, Colorado, USA
Posts: 9,032
|
Aah yes. Good old German-to-English translation.
Look on page 17. It is the slotted screw with the spring around it. Word of caution, never bottom it with a screwdriver. You can find the seat position with two fingers. Note how CMA says 5/2 turns rather than 2 ½ turns. Best, Grady
__________________
ANSWER PRICE LIST (as seen in someone's shop) Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
||
|
01-15-2005, 12:00 PM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
