|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2005
Location: underhill ctr, vt
Posts: 89
|
ROW a/c
On my '84 911 (row) I don't have a forward condenser, the one that appears under the nose of most US cars. It looks like it has always been that way as I can see no holes and I have no trace of the hoses etc inside the drivers wheel well,......yet I do have a condenser on the rear deck as well as the compressor.
Was this typical of row cars, or is mine just, well, an "exception." THANKS, Rich
__________________
1988 911 coupe 1970 911t project 2012 Golf R |
||
12-12-2005, 11:55 AM
|
|
|
Registered
|
My 80 ROW SC has a rear deck lid condensor and an aftermarket rear quarter mounted condensor. No condensor up front.
__________________
John Adams 1980 ROW 911SC |
||
|
12-12-2005, 12:39 PM
|
|
|
Registered
Join Date: Jul 2002
Location: Southern California
Posts: 5,067
|
Contact HughR here on the board. He has an 84 ROW, and has done lots of work and research on ROW a/c.
__________________
1984 Targa |
||
|
12-12-2005, 01:07 PM
|
|
|
Registered
Join Date: Oct 2005
Location: Redlands, CA
Posts: 225
|
Hi!
Same with me. I have a '78 SC and no sign of a front condensor or fan. I only have a small dime sized drain hole in the front. Brad
__________________
'78 911 SC '61 Mercedes 220b '74 Westy 2.0 |
||
|
12-12-2005, 02:18 PM
|
|
|
Detached Member
Join Date: May 2003
Location: southern California
Posts: 26,964
|
My ROW had an after market a/c system with no front condensor. If you buy a used one (I'll see you one cheap with a hole in it). You'll need the squirrel cage fan in the trunk, or as an alternative, I used a couple of high speed 12 volt computer fans.
__________________
Hugh |
||
|
12-12-2005, 02:24 PM
|
|
1980 Porsche ROW 911SC 3.0L
