|
|
|
|
| Author |
|
|
another round please
Join Date: Sep 2004
Location: Carmel In.
Posts: 4,452
|
Alt pully tool, Wt2do if dont have one?
My car had no tool kit in it. I'm about to pull the alternater out and change it. How do you remove the altenater pully without a Porsche tool, the one that has the 2 stubs on it that attaches to the pully? Any ideas? Thanks for any reply.
__________________
Getting old is not for wimps. |
||
04-14-2006, 12:58 PM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
|||
|
04-14-2006, 01:09 PM
|
|
|
Registered
|
This may not be an option for you, however I just use an air impact to zip the bolt of, no holding tool required.
__________________
2021 Model Y 2005 Cayenne Turbo 2012 Panamera 4S 1980 911 SC 1999 996 Cab |
||
|
04-14-2006, 01:09 PM
|
|
|
Registered
Join Date: Mar 2005
Location: Austin, TX
Posts: 2,271
|
I think I have that tool with my tool kit... but how the hell is it used??
I had to replace the alt fan on Stinky, and accomplished it without using the tool. I poked and prodded around, but couldn't figure out where the hell you're supposed to stick it. (I don't usually have that problem)
__________________
Matt J. 69 911T Targa - "Stinky" 2001 Boxster "Stahlgewehr" |
||
|
04-14-2006, 02:20 PM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
Tool pins go into the ring of holes in the outer pulley half/fan. Do you have an owners manual?
|
||
|
04-14-2006, 02:30 PM
|
|
|
Registered
Join Date: Mar 2005
Location: Austin, TX
Posts: 2,271
|
Actually yes, I do have the original owner's manual. I'll have to peruse it and see if the tool is the right one, and if it will work (the tool kit was in my '70... and the engine is from the '70, too)
__________________
Matt J. 69 911T Targa - "Stinky" 2001 Boxster "Stahlgewehr" |
||
|
04-14-2006, 02:33 PM
|
|
|
|
Registered
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,431
|
hold the pulley with large channel-locks while you turn the nut off.
__________________
https://www.instagram.com/johnwalker8704 8009 103rd pl ne Marysville Wa 98270 206 637 4071 |
||
|
04-14-2006, 04:58 PM
|
|
|
another round please
Join Date: Sep 2004
Location: Carmel In.
Posts: 4,452
|
Thanks to all. Since there isn't another P-car owner in the entire county, I'll order one from our host. I guess there are some great ideas to get it off. Is the nut holding the pully on really tight? Thanks
__________________
Getting old is not for wimps. |
||
|
04-14-2006, 05:56 PM
|
|
|
one of gods prototypes
|
may require a little effort to break it free if it hasen't been off in a while, but be carefull if you use channel locks......wrap a rag around the teeth or you'll mark up your outer pulley.
and DO NOT stick something through the fan blades....this is a big no-no as it can damage the fan (precautionary statement  ).
__________________
Brought to you by Carl's Jr. |
||
|
04-14-2006, 07:18 PM
|
|
1985.5 Porsche 944 2.5L Supercharged 
911 SC
Panamera
1985 Porsche 911 carrera targa 3.2
