Help quick please! 82 911SC Speedometer

[racerboyrt]

So the long story short is that the speedometer was taken out to get fixed and now I don't know which wires go where. This was not my fault, but now I have to suffer the consequences. Does anyone have a diagram? I can barter Carfaxs for one. Help Please!

Thanks guys

[wswilburn]

Bentley sez:

WHT/GRN Side Marker Indicator
BLK/BLU Illumination
BLK/BLU Illumination
BRN and BRN/RED -
BRN/RED 31B
WHT/RED and BLK/BRN A
RED/BLU and RED/BLK +12V

Hang on a minute and I'll pull mine out to make sure. I seem to remember something was a bit different.

[racerboyrt]

Thanks!

I will await your response just so I don't mess it up!

[wswilburn]

Bentley's pretty accurate on this one. Only differences I found:

'Side Marker Indicator' is actually highbeam indicator

'-' terminal actually has 3 brown wires (2 crimped to 1 spade connector), in addition to the 1 BRN/RED

[racerboyrt]

Thanks alot Scott, I'm going to go try it now.

If you need any carfax run before August 8th let me know!

Note to everyone else out there: don't let someone else unhook your speedo without taking a diagram first, even if they promise to put it back the way it was

[holtjv]

lemme know if you need to know the specs--I just pulled mine out and drew a diagram in wayne's book. Jack

[racerboyrt]

THanks, Im all set now, got it working perfectly thats to this board!

[Joe Bob]

Originally posted by racerboyrt


If you need any carfax run before August 8th let me know!

I have a need....you have a PM....

Willing to trade some graphics....