2.7 RS replica update

http://forums.pelicanparts.com/uploa...1273829166.jpg

http://forums.pelicanparts.com/uploa...1273829186.jpg

http://forums.pelicanparts.com/uploa...1273829204.jpg

http://forums.pelicanparts.com/uploa...1273829220.jpg

http://forums.pelicanparts.com/uploa...1273829240.jpg

Thanks for the info and pics.

I'm located in Bahrain so finding the good sources for parts is more complicated.
Are there any suppliers of the body parts that you would recommend.

I might go for the stuff from Getty Design although I havent had a chance to see their quality and the strength of the parts.

Sourcing from Europe would be easier.

Thanks again. BMW engine looks very nice

Tereq993,
Have you looked into DP Motorsports for body panels?

DP Motorsports Web Site

Thanks Werk I, I've contacted them for some more info.

BMW 3.5 CSL first Dyno run

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/gRAIqk8sDOE&hl=nl_NL&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gRAIqk8sDOE&hl=nl_NL&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Nice sounds!

This is a great Topic.



Groeten uit Limburg:D

Woof woof!
Makes me want to run out and get a Beemer right now.

Great looking and sounding engine.

What were the final hp and torque numbers?

Did I just wet mysefl? I feel dirty...

That engine looks great! and the sound ! :cool:

Some numbers of the CSL 3.5 on the Dyno.

Air temp 25 degree Celsius.
Max Torque 401,1 NM at 7200 RPM
Max 319 KW / 434 HP at 7200 RPM
Max 8600 RPM

http://forums.pelicanparts.com/uploa...1276347202.jpg

http://forums.pelicanparts.com/uploa...1276347225.jpg

http://forums.pelicanparts.com/uploa...1276347253.jpg

http://forums.pelicanparts.com/uploa...1276347270.jpg

http://forums.pelicanparts.com/uploa...1276347292.jpg

http://forums.pelicanparts.com/uploa...1276347329.jpg

Wim:
You have PM.....

Wim is the CSL 3.5 still at your shop ?

Cheers,

Ed

BMW CSL 3.5 is already running.
Here a movie of the testdrive on Circuit of Zandvoort on 5 Juli.
Action is after 37 Sec.!!!Enjoy

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/vUtZZOWd_lI&amp;hl=nl_NL&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/vUtZZOWd_lI&amp;hl=nl_NL&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

Were you trying to pay tribute to the Calder art car with that paint job?

Wim:
Did you see my PM of last month?....would like to chat on a particular topic

feel free to contact me via email instead of you wish ... ferch dot wil at gmail dot com

SmileWavy

Wow!!!
 

Blown away!! great thread!! love those vintage pics!! Its like walking thru a museum great! just great! Love the work you are doing.. looks first class all the way! Born in Canada but with the last name Bresselaar you can probably guess both my parents are from Holland! DAM THOSE CURSED SPAINIARDS FOR STEALING OUR CUP!! Ha! Ha! Porsche's and "football" I don't fit in with the camaro, wrestling crowds here in rural western Canada!!

The owner of the car was sponsored by "Mobiel Tradition" (Classic BMW motorsport) to paint the car is these colors.
It is a replica of the original of course.

I just replied on your mail

Just left, lol

You can see it on several coming racing events here in Holland and Belgium;)

After several months here some news;
BMW CSL project had finished, car is waiting for his winter sleep;

Here a you tube movie which our cllient made from the car.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/wJVmCXDPLV8?fs=1&amp;hl=nl_NL"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/wJVmCXDPLV8?fs=1&amp;hl=nl_NL" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

And my brother Ralph new Simulator project 3 finished after 2 years of development!'
Professional racing drivers are very inpressed after testing this one!
Here a movie testing the simulato by driving in a 997 Cup by one of our customers.


<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/xseismck5A4?fs=1&amp;hl=nl_NL"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/xseismck5A4?fs=1&amp;hl=nl_NL" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

Enjoy!

I love the CSL. Is there a source for the flares? I would love to build one of these cars but I'm not sure I have the skill to fab the flares from scratch.

Hal

You can contact the owner of the BMW CSL directly.
I think he has molds of the flares en he can reproduce them.

Toon Suijkerbuijk mailadres is;

info@autobedrijfsuijkerbuijk.nl

Some old pics from the 935 on Zandvoort in 1977-1978 season

http://forums.pelicanparts.com/uploa...1288010404.jpg

http://forums.pelicanparts.com/uploa...1288010426.jpg

http://forums.pelicanparts.com/uploa...1288010455.jpg

http://forums.pelicanparts.com/uploa...1288010478.jpg

http://forums.pelicanparts.com/uploa...1288010508.jpg

http://forums.pelicanparts.com/uploa...1288010549.jpg

http://forums.pelicanparts.com/uploa...1288010744.jpg

Update Engine 2.7 RS
 

http://forums.pelicanparts.com/uploa...1304954370.jpg

http://forums.pelicanparts.com/uploa...1304954422.jpg

http://forums.pelicanparts.com/uploa...1304954452.jpg

http://forums.pelicanparts.com/uploa...1304954478.jpg

http://forums.pelicanparts.com/uploa...1304954526.jpg

http://forums.pelicanparts.com/uploa...1304954574.jpg

http://forums.pelicanparts.com/uploa...1304954604.jpg

http://forums.pelicanparts.com/uploa...1304954625.jpg

http://forums.pelicanparts.com/uploa...1304954712.jpg

http://forums.pelicanparts.com/uploa...1304954744.jpg

Sehr Schoen. That Magnesium case is stunning. :)

+1
And what a beautiful shop! So clean and organized, gets my engine building juices flowing about as much as those pictures of the 935s do! droool :eek:

Thanks for sharing!!

wow

Great thread, thanks.

Thanks for all your nice compliments!
Here some update pics of the 911/83 build up.

http://forums.pelicanparts.com/uploa...1308304676.jpg

http://forums.pelicanparts.com/uploa...1308304709.jpg

http://forums.pelicanparts.com/uploa...1308304761.jpg

http://forums.pelicanparts.com/uploa...1308304806.jpg

http://forums.pelicanparts.com/uploa...1308304841.jpg

http://forums.pelicanparts.com/uploa...1308304892.jpg

http://forums.pelicanparts.com/uploa...1308304920.jpg

http://forums.pelicanparts.com/uploa...1308304949.jpg

Wim,

Great pics!

Question: what type of head studs have you used?

Thx,
Doei

André

WOW

great job

@Dede, Just normal old style steel studs, we have coated them.

@Giovanni, I have seen you're doing a great job there on the 74 Iroc build.

http://forums.pelicanparts.com/uploa...1308402508.jpg

http://forums.pelicanparts.com/uploa...1308402541.jpg

http://forums.pelicanparts.com/uploa...1308402573.jpg

http://forums.pelicanparts.com/uploa...1308402615.jpg

http://forums.pelicanparts.com/uploa...1308402960.jpg

Wim,

More pics please, looks incredible.

Thx for your reply regarding the studs.

Interesting to know you used plain steel studs.

I'm considering to rebuild my SC engine. Most people on this board are using in 933 dilivar studs.
Would you recommend steel studs for my application? (road-track car)

Could you tell us more about the coating?

Thx,

André

Wim,
some great job there, really nice.
Why no pictures of the heads?!?!? I can't believe You left them stock. Which CR is this engine going to be? The pistons look quite flat.
Let's show to our american friends that we can also build some good engines in Europe :)
thank You
luca

@piggdekk

Some head & part special for you in our part storage ...........lol:)
Sorry, got messed up with the heads.......:D

http://forums.pelicanparts.com/uploa...1308408021.jpg

http://forums.pelicanparts.com/uploa...1308408050.jpg

http://forums.pelicanparts.com/uploa...1308408207.jpg

http://forums.pelicanparts.com/uploa...1308408270.jpg

http://forums.pelicanparts.com/uploa...1308408298.jpg

http://forums.pelicanparts.com/uploa...1308408341.jpg

http://forums.pelicanparts.com/uploa...1308408373.jpg

http://forums.pelicanparts.com/uploa...1308408441.jpg

Great googly moogly Wim! That's some inventory! Very nice!

Carrera RS 2.7 engine update

http://forums.pelicanparts.com/uploa...1314094912.jpg

http://forums.pelicanparts.com/uploa...1314094940.jpg

http://forums.pelicanparts.com/uploa...1314095032.jpg

http://forums.pelicanparts.com/uploa...1314095076.jpg

http://forums.pelicanparts.com/uploa...1314095121.jpg

http://forums.pelicanparts.com/uploa...1314095141.jpg

http://forums.pelicanparts.com/uploa...1314095165.jpg

Nice :-) Pure engine porn ;-)
Keep it coming

Absolutely stunning!!!!!!!!

My 930 Flatnose

http://forums.pelicanparts.com/uploa...1317466927.jpg


http://forums.pelicanparts.com/uploa...1317466955.jpg


http://forums.pelicanparts.com/uploa...1317467013.jpg


http://forums.pelicanparts.com/uploa...1317467045.jpg


http://forums.pelicanparts.com/uploa...1317467072.jpg


http://forums.pelicanparts.com/uploa...1317467132.jpg


http://forums.pelicanparts.com/uploa...1317467198.jpg