Fuchs wheel all the part numbers and offset
 

I've done a bit research since many asks question about which PN is what and what are the offsets.
Most PN's are from PET and the rest is from BA's Performance Handbook. The offset table has been on this board before, I've just reposted it here to have it all together in one thread.
I had the partnumbers table made in a neat table in MS word but was unable to post it, so I just copy/pasted it.
Another good source of info on wheels is Bill Verburgs page on wheels here: http://members.rennlist.com/1976c38/index.html
Hope he is ok with me refering to his page, but I think it's very good source. It has info about which wheel fit what car/year and lots of other stuff.

Size Offset in mm Partnumber Finish/year
9*16 15 911 362 119 00 Black/86-
9*16 15 911 362 119 90 Unpainted/86-
8*16 10,6 911 361 020 45 Black/-84
8*16 10,6 911 362 117 00 Black/85-
8*16 10,6 911 361 020 99 Unpainted/-84
8*16 10,6 911 362 117 90 Unpainted/85
8*16 23,3 944 offset 951 362 117 00 Black/-86
8*16 23,3 944 offset 951 362 117 90 Unpainted/-86
7*16 23,3 911 361 020 44 Black/-84
7*16 23,3 911 362 115 00 Black/85-
7*16 23,3 911 361 020 98 Unpainted/85-
7*16 23,3 911 362 115 90 Unpainted/85-
7*16 23,3 more caliper room 951 362 115 90 Unpainted/-86
7*16 23,3 more caliper room 951 362 115 00 Black/-86
6*16 36 911 361 020 43 Black/-84
6*16 36 911 362 113 00 Black/85-
6*16 36 911 361 020 97 Unpainted/-84
6*16 36 911 362 113 90 Unpainted/85-
11*15 911 361 020 05
9*15 3 911 361 020 03
8*15 10,6 911 361 020 42
8*15 911 361 020 22 Black
8*15 10,6 911 361 020 94
7*15 23,3 911 361 020 41 Black
7*15 23,3 911 361 020 91 Unpainted
7*15 23,3 911 361 020 93 Unpainted
7*15 23,3 911 361 020 11 ’70
7*15 49 R offset 911 361 012 05
6*15 36 late style 911 361 020 10 -76
6*15 36 early style 911 361 012 06
6*15 36 911 361 020 00 Polish / elox.
6*15 36 911 361 023 10 70-
6*15 911 361 020 90 Unpainted
5,5*15 42 901 361 012 04 ’68
5,5*15 42 901 361 117 00 ’69
4,5*15 42 901 361 012 01 -67
5,5*14 41 901 361 016 00 Polish/elox’69


http://forums.pelicanparts.com/uploa...1168833827.jpg

Disclaimer: I'm only human so bare over with me is you find a fault, post your disagreement and I'll do my best to correct it.

Thanks for that info, very helpful!

Hi There,

Thanks for posting the details as I wasn't sure if my wheels were original Fuch's and if they were original to my model/year. Below is what I have on my '78 SC, I'm assuming then they are correct for my model/year?

Front - 6*16 36 911 361 020 43 Black/-84

Rear - 7*16 23,3 911 361 020 44 Black/-84

Cheers
Roni

Will these >84 rims work on my 89
 

Hi,

Curious if anyone can advise if the rims just mentioned above and restated below will fit my 1989 911 with no trouble? I purchased some 'cores' out of CA--which I specified needed to fit an 89--which were then sent to Al Reed for refinishing. They just arrived from Al and look nice.

Front - 6*16 911 361 020 43 Black/-84
Rear - 7*16 911 361 020 44 Black/-84

Thanks.

They fit fine but are on the narrow side

I'd love to be able to order the 9's unpainted; clean canvas: 9*16 15 911 362 119 90 Unpainted/86-

jp

Great info..thanks!

porsche 911 wheel sizes & ofsets
 

very helpful - esp. since google finds this! SmileWavy

for those who have old Panoramas or UpFixin - check out the April 1995, Sept 1996 and Dec 1989 issues for charts & more discussion :)

p.s. - the rennlist link above is old & DEAD - new link below from Bill is https://members.rennlist.com/1976c38/wheels.htm

update - this is also a very informative thread with 911 vs 951 details!
http://forums.pelicanparts.com/porsche-911-technical-forum/804939-911sc-7-front-8-back-x-16-fuch-offset.html

My Rennlist link is in my sig
wheels

Mine are missing the last two digits? Any thoughts..911 361 020