Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
palle7688's Avatar
 
Join Date: Feb 2004
Location: Copenhagen, Denmark
Posts: 433
Fuchs wheel all the part numbers and offset

I've done a bit research since many asks question about which PN is what and what are the offsets.
Most PN's are from PET and the rest is from BA's Performance Handbook. The offset table has been on this board before, I've just reposted it here to have it all together in one thread.
I had the partnumbers table made in a neat table in MS word but was unable to post it, so I just copy/pasted it.
Another good source of info on wheels is Bill Verburgs page on wheels here: http://members.rennlist.com/1976c38/index.html
Hope he is ok with me refering to his page, but I think it's very good source. It has info about which wheel fit what car/year and lots of other stuff.

Size Offset in mm Partnumber Finish/year
9*16 15 911 362 119 00 Black/86-
9*16 15 911 362 119 90 Unpainted/86-
8*16 10,6 911 361 020 45 Black/-84
8*16 10,6 911 362 117 00 Black/85-
8*16 10,6 911 361 020 99 Unpainted/-84
8*16 10,6 911 362 117 90 Unpainted/85
8*16 23,3 944 offset 951 362 117 00 Black/-86
8*16 23,3 944 offset 951 362 117 90 Unpainted/-86
7*16 23,3 911 361 020 44 Black/-84
7*16 23,3 911 362 115 00 Black/85-
7*16 23,3 911 361 020 98 Unpainted/85-
7*16 23,3 911 362 115 90 Unpainted/85-
7*16 23,3 more caliper room 951 362 115 90 Unpainted/-86
7*16 23,3 more caliper room 951 362 115 00 Black/-86
6*16 36 911 361 020 43 Black/-84
6*16 36 911 362 113 00 Black/85-
6*16 36 911 361 020 97 Unpainted/-84
6*16 36 911 362 113 90 Unpainted/85-
11*15 911 361 020 05
9*15 3 911 361 020 03
8*15 10,6 911 361 020 42
8*15 911 361 020 22 Black
8*15 10,6 911 361 020 94
7*15 23,3 911 361 020 41 Black
7*15 23,3 911 361 020 91 Unpainted
7*15 23,3 911 361 020 93 Unpainted
7*15 23,3 911 361 020 11 ’70
7*15 49 R offset 911 361 012 05
6*15 36 late style 911 361 020 10 -76
6*15 36 early style 911 361 012 06
6*15 36 911 361 020 00 Polish / elox.
6*15 36 911 361 023 10 70-
6*15 911 361 020 90 Unpainted
5,5*15 42 901 361 012 04 ’68
5,5*15 42 901 361 117 00 ’69
4,5*15 42 901 361 012 01 -67
5,5*14 41 901 361 016 00 Polish/elox’69




Disclaimer: I'm only human so bare over with me is you find a fault, post your disagreement and I'll do my best to correct it.

__________________
You might not be happier owning a Porsche, but it certainly feels so driving one
Old 01-14-2007, 07:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Carbon Emitter
 
jkarolyi's Avatar
 
Join Date: Feb 2004
Location: Socialist Republic of California
Posts: 2,129
Thanks for that info, very helpful!
Old 01-14-2007, 08:08 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
FIG FIG is offline
Registered User
 
FIG's Avatar
 
Join Date: Jan 2011
Location: Melbourne, Australia
Posts: 267
Garage
Hi There,

Thanks for posting the details as I wasn't sure if my wheels were original Fuch's and if they were original to my model/year. Below is what I have on my '78 SC, I'm assuming then they are correct for my model/year?

Front - 6*16 36 911 361 020 43 Black/-84

Rear - 7*16 23,3 911 361 020 44 Black/-84

Cheers
Roni
__________________
'65 Porsche 912 (painted dash) #451232
'65 Porsche 912 (painted dash) #451425 - 13 days younger
'78 Porsche 911SC - Resto garage queen
Old 01-31-2011, 12:57 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
jkevinc's Avatar
 
Join Date: Dec 2011
Posts: 60
Will these >84 rims work on my 89

Hi,

Curious if anyone can advise if the rims just mentioned above and restated below will fit my 1989 911 with no trouble? I purchased some 'cores' out of CA--which I specified needed to fit an 89--which were then sent to Al Reed for refinishing. They just arrived from Al and look nice.

Front - 6*16 911 361 020 43 Black/-84
Rear - 7*16 911 361 020 44 Black/-84

Thanks.
Old 10-03-2012, 02:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Moderator
 
Bill Verburg's Avatar
 
Join Date: Dec 2000
Posts: 26,410
Garage
Quote:
Originally Posted by jkevinc View Post
Hi,

Curious if anyone can advise if the rims just mentioned above and restated below will fit my 1989 911 with no trouble? I purchased some 'cores' out of CA--which I specified needed to fit an 89--which were then sent to Al Reed for refinishing. They just arrived from Al and look nice.

Front - 6*16 911 361 020 43 Black/-84
Rear - 7*16 911 361 020 44 Black/-84

Thanks.
They fit fine but are on the narrow side
__________________
Bill Verburg
'76 Carrera 3.6RS(nee C3/hotrod), '95 993RS/CS(clone)
| Pelican Home |Rennlist Wheels |Rennlist Brakes |
Old 10-03-2012, 07:27 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
jpahemi's Avatar
 
Join Date: Feb 2004
Location: Long Island, N.Y.
Posts: 1,798
I'd love to be able to order the 9's unpainted; clean canvas: 9*16 15 911 362 119 90 Unpainted/86-

jp
Old 12-28-2013, 07:32 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
0396's Avatar
 
Join Date: Sep 2005
Posts: 950
Great info..thanks!
Old 09-16-2014, 07:25 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
ASE Master Tech - 35 yrs
 
larrym's Avatar
 
Join Date: May 2001
Location: Sierra foothills, CA-usa
Posts: 1,107
Garage
Arrow porsche 911 wheel sizes & ofsets

very helpful - esp. since google finds this!

for those who have old Panoramas or UpFixin - check out the April 1995, Sept 1996 and Dec 1989 issues for charts & more discussion

p.s. - the rennlist link above is old & DEAD - new link below from Bill is https://members.rennlist.com/1976c38/wheels.htm

update - this is also a very informative thread with 911 vs 951 details!
911SC 7 front - 8 back x 16" Fuch Offset?
__________________
"... I am German, and if it has no logic it's meaningless."

914 & 914-6 parts FS 03-2021 www.tinyurl.com/2pmpmv8y

911 parts FS 2022 https://tinyurl.com/911-Parts-FS-LCM

Last edited by larrym; 12-11-2017 at 06:34 PM.. Reason: update
Old 12-09-2017, 08:36 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Moderator
 
Bill Verburg's Avatar
 
Join Date: Dec 2000
Posts: 26,410
Garage
Quote:
Originally Posted by larrym View Post
very helpful - esp. since google finds this!

for those who have old Panoramas or UpFixin - check out the April 1995, Sept 1996 and Dec 1989 issues for charts & more discussion

p.s. - the rennlist link is old & DEAD
My Rennlist link is in my sig
wheels
__________________
Bill Verburg
'76 Carrera 3.6RS(nee C3/hotrod), '95 993RS/CS(clone)
| Pelican Home |Rennlist Wheels |Rennlist Brakes |
Old 12-10-2017, 05:55 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Registered
 
flatable's Avatar
 
Join Date: Feb 2011
Location: Germantown, WI
Posts: 24
Garage
Mine are missing the last two digits? Any thoughts..911 361 020

Old 02-02-2019, 02:10 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
Reply


 


All times are GMT -8. The time now is 04:20 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.