![]() |
|
|
|
Registered
Join Date: Apr 2005
Location: Derry, New Hampshire
Posts: 618
|
RSA door panels
For those that have installed the RSA door panels. How did you install the door pull, i.e. the handle used to pull the door closed. Did you have to drill holes into the door in order to secure it?
__________________
- Tyler 1988 911 Carrera Grand Prix White/Black 2015 Cayenne Diesel Black/ Luxor Beige/Black |
||
![]() |
|
Registered
Join Date: Jan 2004
Location: Charleston, SC
Posts: 821
|
I used the inserts provided which do require holes being drilled in the door. They were a bit of a pia but if they get buggered up they have them at the hardware store.
__________________
Kevin '79 Coupe |
||
![]() |
|
Registered
Join Date: Aug 2003
Location: Westchester, NY
Posts: 889
|
Yes, you need to drill holes. Not a big deal. Pickup some washers to use as spacers or you won't be able to get the plastic covers on the ends of the handle.
__________________
Sean 1982 SC D-Stock #372 NASA GTS2 1971T restoration in progress, read about it here: http://911restorationmadness.blogspot.com/ |
||
![]() |
|
Registered
Join Date: Dec 2004
Location: Danville - CA
Posts: 1,259
|
Just make sure that your windows are UP before drilling.
__________________
Rob Montgomery '88 Blk/Blk 930 ('Lucy') - Not Stock & Not Running |
||
![]() |
|
Registered
Join Date: Apr 2005
Location: Derry, New Hampshire
Posts: 618
|
Thanks guys, I figured I had to drill and yes I made sure the windows were up. I will say the directions these panels came with were the worst I've ever seen for any product I've ever purchased.
__________________
- Tyler 1988 911 Carrera Grand Prix White/Black 2015 Cayenne Diesel Black/ Luxor Beige/Black |
||
![]() |
|