|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2005
Location: Santa Ana, CA
Posts: 1,117
|
Where can I get a WUR Connector?
Does anyone know where I can buy a new connector (new or used) for the WUR wires? Not sure if the year matters, but I have a 1982 SC.
My car was running like crap last week - when it was cold, it was coughing and sputtering. Thankfully when I popped the lid and checked things out I noticed that the wires that plug into the WUR were loose. Apparently, the plastic piece that locks onto WUR broke so the connector was loose. I pushed the connector firmly onto the plug and the car runs fine now. However, the connector is still not locking onto the plug and will probably come loose again in a few days of driving. I have no idea if this part is available for sale or if I'll have to get one off of a donor SC. Thanks, Gabe ----------------------- '82 911SC Targa '61 356B Karmann Notchback |
||
03-24-2008, 08:46 AM
|
|
|
Registered
Join Date: Apr 2003
Location: Maitland, Florida
Posts: 892
|
__________________
82 911SC Targa (05 Boxster S ) gone, but not forgotten 87 Suzuki GSXR-1100 1953 MG TD Mk II |
||
|
03-24-2008, 12:15 PM
|
|
|
Registered
|
Wur....
Gabe,
Do you need one like this (blue)? PM me your address and I'll ship one to you. These connectors are used but still in good condition. I used them for my test connector to WUR, AAR, and CSV. HTH.  Tony |
||
|
03-24-2008, 01:22 PM
|
|
|
Registered
Join Date: Apr 2005
Location: Santa Ana, CA
Posts: 1,117
|
Jerry and Tony - Thanks so much for your help. I ended up ordering one from the eagleday website.
|
||
|
03-29-2008, 03:15 PM
|
|
