![]() |
|
|
|
Registered
Join Date: Mar 2007
Location: Sunny Altadena, CA
Posts: 88
|
Headliner Question
Hey All-
Installing a new headliner, but of course I've forgotten how the headliner glues to the front door pillar. ![]() Does the headliner glue to the door pillar window flange or does it glue to the door pillar itself? ![]() Thanks in advance!
__________________
1969 911 Outlaw 2.2T |
||
![]() |
|
Registered
Join Date: Jun 2004
Location: Prescott, AZ
Posts: 180
|
It's been a couple of years since I did one on a 74, but as I recall, it glued to the window flange. I also recall trimming it so it didn't go so far down the pillar as you have in your picture.
There is a leather pillar trim piece that is rolled at the top. It covers the headliner edge. I trimmed the pillar section of the headliner so the leather trim covered it by about 1". Hope that helps.
__________________
Jim T. 87 911 Carrera Guards Red Coupe Cat Bypass, SW Chip, 7's & 9's |
||
![]() |
|
Stressed Member
|
Outlaw-
Glue it to the window flange of the A pillar on the outside face. The windshield seal will help to tension it. The A-pillar trim looks nice when it starts a little below the intersection of A pillar and roof.
__________________
'70 911E short stroke 2.5 MFI. Sold ![]() ![]() ![]() '56 Cliff May Prefab |
||
![]() |
|