|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2006
Location: beautiful San Diego
Posts: 171
|
window closes too high
I sure this has come up in this forum, but I have search and have not found anything.
The window on my cab closes too high  I saw some post on the window regulator, but they did not seem to mention this specific issue
__________________
Brad 1983 911 Cabriolet (daily driver) 2000 ML 320 (Shared by teenagers) 2005 Pilot (Wife's) |
||
12-25-2008, 12:24 PM
|
|
|
Registered
Join Date: Dec 2008
Location: San Antonio, Texas
Posts: 3,590
|
Remove door trim adjustment bolts will be visible
__________________
1973 911S (since new) RS MFI specs 1991 C2 Turbo |
||
|
12-25-2008, 12:27 PM
|
|
|
Registered
Join Date: Aug 2008
Location: Northern Virginia
Posts: 9
|
Although I haven't tried it yet, the Bentley service manual has a couple of pages on this as it seems to plague the cab and targa guys. My guess is that previous owners take the car in because it either leaks, makes noise, or both and in order to fix those issues, the resolution is to have the windows go up too far. On my targa, they go up so far similar to your photo that the windows protrude at an odd angle when I go to shut the doors! I hope to make this a winter project time permitting.
- Darryl
__________________
1982 911SC Targa 1992 968 Cabriolet 1993 968 Coupe 1985.5 944 NA - SOLD |
||
|
12-25-2008, 03:46 PM
|
|
|
Registered
Join Date: Nov 2004
Location: Raleigh, NC
Posts: 3,868
|
__________________
John D. 82 911 SC Targa-Rosewood 2012 Golf TDI |
||
|
12-25-2008, 04:15 PM
|
|
|
Registered
Join Date: Apr 2008
Location: Miami
Posts: 961
|
The oblong slot shown in GothingNC's post does the adjustment. That happens to me over and over again. I can adjust it so that it works well for a while but with time it slowly creeps higher and higher until it is back to the condition in your picture. I've even considered putting limit switches and relays!
__________________
1979 SC, Slant nose wide-body cab conversion. AEM Infinity EFI, COP, supercharged! |
||
|
12-26-2008, 11:15 AM
|
|
