Any use for Junk Cylinders?

[Pele911]

Happy New Year. Man, Id love a P&C cool conversation piece. Let me know cost. Thanks

[rouxroux]

I'd love to have one next to one of my 'Vair jugs for a bookend. Let me know shipping cost, OK?

[Dantilla]

Originally Posted by burgundyben

Can the cylinders be bored to 98mm? Replated? Set of JE pistons....

There are several 98mm cylinders. It will take some time to see if there is a matched set that is usable. There is one complete set of pistons and cylinders, but I don't remember if they are 95mm or 98mm.

[rfuerst911sc]

I've always wanted to build a Porsche engine table. You know a glass topped table. Find a crappy engine case and it sounds like you have the parts to do so. I might be interested in 6 to do just that.

[Doug E]

Thanks for the offer ... please put me down for a cylinder.

I'll clean it up and then figure out where to display it

[burgermeister]

Back when I used to smoke I had several beetle piston ashtrays. They wrist pin holes make good cigarette holders. The cigarettes taste odd after the cherry contacts the aluminium ...

[davisriley]

I also would love a piston and cylinder. Just let me know shipping when you get a chance. Thanks.

[jac1976]

I am in, too.

[ned903]

I'd love a cylinder and a piston. Perfect desk accessories!

Let me know what you work out.

[wholberg]

I would like one also.

[carolinatrophy]

If you still have any of them, I'll buy them off you as long as they are pretty cheap. I have an "art" use for them...

[euro911sc]

I also have an 'ART' use Let me know shipping on a couple of piston/cyl extras please.

Best regards,

Michael

[scottb]

It'd make a nice piece on my desk. Let us know the weight for shipping purposes...

[myamoto1]

Dantilla - where in the "soggy NW" are you located? I'm in Portland.

[DSouth]

I'd love a cylinder, maybe a piston too. Let us know about shipping.

[allaircooled]

Count me in on a piston and cylinder if any are left. They don't have to be the same bore. Maybe a couple of rods too. Let us know how much you want for these and shipping costs.

[Dantilla]

Okay, guys-

There are over 100 cylinders. The most popular bore is 90mm, with CIS style pistons. That means a good chunk of these came from our favorite 1974-1977 era 2.7. What a suprise!

Shipping will be a bit more than I thought. Looks like a cylinder, shipped to your door, will be $20. If you want both a piston and cylinder, $25.

Here is a 95mm:



I have a few 97mm from the 3.3 turbo:



Here are a few of the 90mm. I'll knock the carbon off with a Scotch Bright pad before shipping:



I also have some 84mm iron cylinders, from a 2.4 "T", but since they were in a damp environment for a while, they have some surface rust. I may have a friend hit them in his sandblasting cabinet and see if they shine back up.

If you don't care about size, I'll probably send a 90mm. If you want something else, let me know.

I haven't used my PayPal account for quite a while. I need to go make sure everything is current (and that I remember the password!).

I've got some shipping boxes ready to go, so if I get $20 or $25 and a mailing address, I'll start shipping.

[scottb]

Let us know your PayPal info and a payment will be on the way!

[Dantilla]

OOPS!!

Just checked my Paypal account- It was still under an old email address that is no longer valid. I'll have to update that.....

[JeremyD]

Let me know too - I'll take a turbo P & C - make it $30 to include your time.