![]() |
|
|
|
Registered
|
'72 Wiring behind ignition switch
I had a failure of the 'electrical portion' of the ignition switch and after some strain, sweat and colorful language, I was able to replace it. In the course of trying to reach the screws (I replaced them with allen head bolts), I had to move all three plugs that pass through the trunk panel. Pretty sure which goes where, but if anyone has a photo showing the three panel plugs in place, I'd really appreciate it.
I did a search and went through a ton of results and didn't see a photo like this... :-/
__________________
techweenie | techweenie.com Marketing Consultant (expensive!) 1969 coupe hot rod 2016 Tesla Model S dd/parts fetcher |
||
![]() |
|
Registered
|
Ok, Bobboloo helped me out: the three plugs are (right to left) ignition switch, harness from passenger side (glovebox area) and hazard switch.
__________________
techweenie | techweenie.com Marketing Consultant (expensive!) 1969 coupe hot rod 2016 Tesla Model S dd/parts fetcher |
||
![]() |
|