 
					|   | 
 | 
 | 
| 
 | 
| Registered Join Date: Dec 2003 Location: Weddington, NC 
					Posts: 79
				 | 
				
				Newbie 3.2 Liter Start-up issue
			 
			Hey all - need a little help! Well, alot of help actually..... I have a '75 Carrera with an '86 3.2 liter engine in it - problem occurs just after starting - engine starts up fine but then seems to bog down - almost like it's drowning itself. It chugs for a few minutes and then settles down to a proper idle. This sometmes occurs when driving but primarily after start-up. I've checked for vac leaks - found and corrected a couple - but there is obviousy something I'm missing. Also getting copious amounts of smoke after it settles down. Any suggestions? Thanks for your help. 
				__________________ KAMPS '75 Carrera '03 Moto Guzzi California EV | ||
|  08-16-2009, 04:12 AM | 
 | 
| Registered Join Date: May 2005 Location: Cridersville, OH 
					Posts: 1,879
				 | 
			How do you have the vent hose for the oil tank ran? Are you using the hose from the 3.2? Can you post some pics? I'll try and help, I've got a 87 3.2 in mine but I'm running megasquirt so I may not be able to help in the ecu dept.
		 
				__________________ 75 911 Indian Red- RUFWAN2B 2000 Boxster 2000 & 2007 Dobies www.stahlwerks.com Cages and preparation for your Porsche “People who never make mistakes must get tired of doing nothing” Bill : The origin of the orgy of Porsche | ||
|  08-16-2009, 04:21 AM | 
 | 
| Registered Join Date: Aug 2004 Location: San Antonio, TX 
					Posts: 1,814
				 | 
			Sounds like the CHT probe is inop.
		 
				__________________ Paul 1980 911SC Targa - Sold 1972 914 - Sold | ||
|  08-16-2009, 04:27 AM | 
 | 
| Registered Join Date: Dec 2003 Location: Weddington, NC 
					Posts: 79
				 | 
				
				newbie 3.2 start-up issue
			 
			thanks gents. I'll check the oil tank line..... What's the CHT? DUH! 
				__________________ KAMPS '75 Carrera '03 Moto Guzzi California EV | ||
|  08-16-2009, 05:17 AM | 
 | 
| Registered Join Date: May 2005 Location: Cridersville, OH 
					Posts: 1,879
				 | 
			Cylinder head temp. It's on the front (trans side) of the #3 head. It plugs in at the connector on #3 intake runner.
		 
				__________________ 75 911 Indian Red- RUFWAN2B 2000 Boxster 2000 & 2007 Dobies www.stahlwerks.com Cages and preparation for your Porsche “People who never make mistakes must get tired of doing nothing” Bill : The origin of the orgy of Porsche | ||
|  08-16-2009, 05:29 AM | 
 | 
| Registered Join Date: Aug 2004 Location: San Antonio, TX 
					Posts: 1,814
				 | 
			Check out Part #:   930-606-915-00-M14  in the pelican catalog.  There is a technical article linked under the Notes tab.
		 
				__________________ Paul 1980 911SC Targa - Sold 1972 914 - Sold | ||
|  08-16-2009, 05:43 AM | 
 | 
|   | 
| Registered Join Date: Dec 2003 Location: Weddington, NC 
					Posts: 79
				 | 
				
				3.2 Start-up Issue
			 
			Thanks for all the feedback. As soon as I can check this all out I'll let you know the outcome.
		 
				__________________ KAMPS '75 Carrera '03 Moto Guzzi California EV | ||
|  08-17-2009, 05:01 AM | 
 |