A question concerning Wevo shifter installation

[cdrik915]

Hi mates ,

I installed a Wevo shifter lever , and i noticed that the cup bushing is not completely sits in his location : see pic joined.

You can noticed so that i have an intermediate" plate " between the aluminium body that receives the Wevo and the ground ; approximatively 1 cm of hight , and this part is a factory one, that figures with the original mounting.

My question is to know if others owners of Wevo shifter have the same intermediate plate , or if i must remove this part to have the cup bushing fitting completely in his location on the tube.

I tryed without this part , but it seems do not working at all.

All imputs appreciated ,

Cedric.

[cdrik915]

Ok , that's solved : i removed the intermediate plate and that's okaaaaaaaaaaaaaaaaaaaayyy !!!!

I precise all the bolts must be changed for shorters ones , to bolt the body on the ground.