|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2001
Location: Anderson, SC, USA
Posts: 52
|
No Spark!!!! HELP!!
I am trying to get my 80 SC running again and I am having a few problems.
I dont seem to be getting any power to my CD unit? There are two wires that arent connected and I was wondering need to be connected to. Here is a description. In the loom coming from the CD unit on the drivers side of the engine compt. there are two wires, one red about 12 guage and a brown w/red stripe. Mine are just exiting the loom and arent plugged in? HELP!!!! I am not getting any spark so I checked for power at the coil, nadda. So I checked for power to the cd unit, no wires in the conector have power. There is a read wire in there that I suspect is the power lead and it is one of the wires in question. I removed the engine about 3 months ago and didnt label the wires ARGGG. If anybody know please respond ASAP. I am tryig to get it running today. Ben in SC |
||
07-15-2001, 01:24 PM
|
|
|
Registered
Join Date: Dec 1999
Location: TX USA
Posts: 9,804
|
Ben,
Haven't you found Pelican's Electrical Diagrams, yet?  ------------------ Warren Hall 1973 911S Targa |
||
|
07-15-2001, 01:40 PM
|
|
|
Registered
Join Date: Apr 2001
Location: Anderson, SC, USA
Posts: 52
|
I found it about 30 seconds after I posted this question...... It fired right up once I found the connector for the CDI....
Thanks anyways. Ben in SC Now running again!! 
|
||
|
07-15-2001, 01:42 PM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
