|
|
|
|
| Author |
|
|
Banned
Join Date: Apr 2004
Location: Portugal
Posts: 1,513
|
Measuring control pressure
Can anyone give me a quick recap ?
For measuring control pressure you should connect the gauge (on the FD side) before or after the line that goes to the throttle regulator ? |
||
07-07-2011, 01:06 AM
|
|
|
Registered
|
You need to connect it in between the warmup regulator and the fuel distributor. I seem to recall that you want the valve side of the gauge connected to the warm up regulator.
__________________
_______________ 1981 911 SC 2013 BMW 535iX Sport (family hauler) 1988 BMW R100RS (gone, but not forgotten!) |
||
|
07-07-2011, 03:47 AM
|
|
|
Registered
Join Date: Oct 2005
Location: Capistrano Beach, Ca.
Posts: 7,235
|
Because the 74 has the throttle regulator, you need to connect the gauge so the line to the throttle regulator is on the valved side of the gauge, along with the line to the wur.
__________________
L.J. Recovering Porsche-holic Gave up trying to stay clean Stabilized on a Pelican I.V. drip |
||
|
07-07-2011, 07:09 AM
|
|
|
Banned
Join Date: Apr 2004
Location: Portugal
Posts: 1,513
|
thanks ossi, this means the gauge connects directly to the fd with nothing in between.
I was doing it wrongly, connecting after the exit to the throttle reg. |
||
|
07-07-2011, 07:12 AM
|
|
