|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2001
Location: mt. vernon Wa. USA
Posts: 8,714
|
nedded - torque values for 3.6 head stud nuts
If anyone out there can provide the torque values for my 91 3.6 engine head stud nuts...I would appreciate it. Or if you can post or email me the sheet with all the torque values...i'd appreciate it even more.
thx, Al
__________________
[B]Current projects: 69-911.5, Previous:73 911X (off to SanFrancisco/racing in Germany).77 911S (NY), 71E (France/Corsica), 66-912 ( France), 1970 914X (Wisconsin) 76 911S roller..off to Florida/Germany RGruppe #669 http://www.x-faktory.com/ |
||
08-13-2011, 03:05 PM
|
|
|
Registered
Join Date: Oct 2005
Location: Idaho
Posts: 2,356
|
Al -
Here's some screen grabs from the workshop manuals I have - fwiw. I don't know if there is any different prevailing wisdom on this topic though! You may want to post in the engine buinding forum too? The first is for a 964 engine, the second is for a 993 engine. Tom  
__________________
'74 911 Red Sunroof Coupe, 3.6L, etc... '76 912 Yellow SPEC 911/911CUP |
||
|
08-14-2011, 06:51 AM
|
|
|
Registered
Join Date: Jul 2001
Location: mt. vernon Wa. USA
Posts: 8,714
|
thanks very much for that info.
regards, al
__________________
[B]Current projects: 69-911.5, Previous:73 911X (off to SanFrancisco/racing in Germany).77 911S (NY), 71E (France/Corsica), 66-912 ( France), 1970 914X (Wisconsin) 76 911S roller..off to Florida/Germany RGruppe #669 http://www.x-faktory.com/ |
||
|
08-14-2011, 07:11 AM
|
|
