Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
kkinzli's Avatar
 
Join Date: May 2009
Location: Lakewood Colorado
Posts: 1,346
Starter Issue on 69

Morning Folks!

I am having some issues with the starter on my 69. To start off I replaced both the starter and solenoid two years ago. Currently, the starter functions intermittently and seems to be heat related. I have been thinking that it could be the ground or the solenoid? Anybody have something like this happen before?

Cheers and thanks

__________________
1969 911T - The "Rat"
1997 A4 Quattro 2.8 (270k) - Black Kaniget - Dead but not forgotten
2010 Jetta TDI Sportwagen - Egg Butt (also Spewing Dragon)
2001 Eurovan Weekender - Bruni
Old 09-13-2011, 05:02 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Oct 2005
Location: Capistrano Beach, Ca.
Posts: 7,235
Checking/cleaning ground and positive connections is definitely the first order of business. Before you invest in a new solenoid/starter, however, run a check on your ignition switch as this is typically a failure point. If you look under the dash, you should see a yellow wire from the ignition switch--that's the wire to the solenoid--and there should be a connector where you can separate the wire from the switch side (there should also be a connector in the trunk, under the cowl, where the wires from the ignition enter the trunk area where the yellow wire can be separated.) The next time you have a no-start problem, disconnect the yellow wire and touch a hot lead jumper to the end of the yellow wire that goes to the solenoid. If the starter engages with the jumper, your ignition switch is suspect.
__________________
L.J.
Recovering Porsche-holic
Gave up trying to stay clean
Stabilized on a Pelican I.V. drip
Old 09-13-2011, 07:44 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
RETIRED
 
Joe Bob's Avatar
 
Join Date: Jul 1999
Location: BOULDER Colorado
Posts: 39,412
Garage
Depending on the rebuilder, they may have neglected to repalce or service the solenoid. Old gunky grease.....
Old 09-13-2011, 08:14 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
kkinzli's Avatar
 
Join Date: May 2009
Location: Lakewood Colorado
Posts: 1,346
Thanks guys! I will try to get to it this weekend and will post on what I find.

__________________
1969 911T - The "Rat"
1997 A4 Quattro 2.8 (270k) - Black Kaniget - Dead but not forgotten
2010 Jetta TDI Sportwagen - Egg Butt (also Spewing Dragon)
2001 Eurovan Weekender - Bruni
Old 09-14-2011, 04:41 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply


 


All times are GMT -8. The time now is 10:36 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.