915 LHD Gearbox convert to RHD

[Websta]

I am looking to convert a 1972 right hand drive 911E sportomatic to manual using a left hand drive 915 gearbox - will the LHD gearbox linkages convert to my RHD car?

[Fishcop]

Yes. The gearbox set up is identical LHD or RHD. It's only the RHD pedal box that is significantly different (and harder to locate).

[Websta]

Thanks for the confirmation - I have looked at the pedal setup and can ID the clutch pedal parts I need

[Fishcop]

I was able to convert my sporto pedal box with minimal fuss.

[Websta]

Sounds like you have done this before - thanks for the advice!! A couple of further questions, the CV joints are different (4 vs 6 bolts and possibly different spline configuration) - presumably I will need all the 615 drive train components from the transmission flange to the wheel hub - do you know if the wheel stub shaft and bearing fit in my 1972 control arm? Also, are the drive shaft lengths the same - or if not presumably I can replace these with the correct length - I think the 615 box is a 78 version or thereabouts?