|
|
|
|
| Author |
|
|
Taxidodger
Join Date: Aug 2011
Location: NYC
Posts: 16
|
A little ashamed to admit this, but I am stuck with this simple project. I cannot get the sprocket inside the disk to move I have loosened the locking nuts where the cable attaches to the hub. The brakes are quite new big red conversion so I dont think that rust is the problem. Before I pull the disks off, is there a simple something that I have overlooked?
thanks __________________ This post was auto-generated based upon a question asked on our tech article page here: Pelican Technical Article: Parking Brake Adjustment - 911 (1965-89) - 930 Turbo (1975-89) |
||
05-28-2013, 02:04 PM
|
|
|
Moderator
Join Date: Jul 2012
Location: New England
Posts: 3,189
|
Brake dust and corrosion have probably collected on the threads of the shaft. Try cleaning it off and apply a penetrating oil to lubricate the threads so you can more the sprocket freely
- Nick |
||
|
05-28-2013, 02:04 PM
|
|
