 
					|   | 
 | 
 | 
| 
 | 
| Registered User | 
				
				Third brake light blocks rear visibility, solutions?
			 
			I have been driving my new to me 86 coupe and since I am tall I notice the third brake light basically obscures the entire lane directly behind me.  I want to remove it, has anyone and does it look bad when removed? I was wondering if others have this problem and if they have a solution. I have looked at some of the LED threads and I don't want to go there if there is another solution. I thought turbos had a mount outside on the engine lid, any way to make that work on a Carrera? | ||
|  09-05-2013, 02:02 PM | 
 | 
| 86FlatSix | 
			You can go for the ET style 3rd brake lights mounted on the engine lid or on the tail, if any.  I am relatively short 5'7, so I don't have problems on the 3rd brake of my 86.
		 
				__________________ 74 BMW 2002 (rust rocket) 86 911 Coupe (weekend warrior) 09 997.2 C2 (semi-daily) | ||
|  09-05-2013, 02:46 PM | 
 | 
| Registered | 
			I have the same issue with my 86, although I am not tall and it still gets in my way. I am going to live with it for now.
		 | ||
|  09-05-2013, 02:46 PM | 
 | 
| Registered | 
			Any of you wounded by an uneasy (haunting) idle when cold?
		 | ||
|  09-05-2013, 02:48 PM | 
 | 
| Rescuer of old cars | 
			If you remove it, it leaves a black area the same shape laminated in the glass. Or so I was told.
		 
				__________________ 2018 718 Cayman 2.0 Priors - '72 911T coupe, '84 911 Carrera coupe, '84 944, '73 914 2.0 | ||
|  09-05-2013, 05:44 PM | 
 | 
| Go-Kart Mozart | 
			Same here.  86 and tall.  I'm dealing with it.  IIRC Daniel Stern sells a generic Hella CHMSL that could be mounted low on the rear glass.   I think some years the factory mounted the CHMSL on the bottom edge.  -J 
				__________________ 86 Carrera Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats. H. L. Mencken | ||
|  09-05-2013, 06:33 PM | 
 | 
|   | 
| Registered User | 
			I saw the black on the glass and was wondering if is scraped off or if it is permanent.  I was afraid of damaging the defroster getting it off.
		 | ||
|  09-05-2013, 06:47 PM | 
 |